{"title":"Early and Late Ford Bronco and Full Size","description":"\u003cp\u003e\u003cem\u003e[PLACEHOLDER — replace with RMM copy]\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"pn1306","title":"Heavy Duty 7\/8\" Heim Steering Kit","description":"\u003ch3\u003eHeavy Duty 7\/8\" Heim Steering Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty steering upgrade with easier adjustment and stronger tubing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis DIY 7\/8\" Heim Steering Kit delivers strength, adjustability, and durability for off-road rigs. Designed for use with stock steering positions or high steer arms (requires 3\/4\" bore in arms or knuckles), it uses hex head weld bungs so you can adjust with a crescent wrench instead of a pipe wrench—saving your tubing and paint from damage. Built with 1.5\" x .250\" wall DOM tubing and heat-treated chromoly heims, this setup is a major upgrade from stock.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1306\u003c\/li\u003e\n\u003cli\u003eWorks with stock knuckle position or high steer arms (3\/4\" bore required)\u003c\/li\u003e\n\u003cli\u003eHex head weld bungs allow quick and safe adjustments\u003c\/li\u003e\n\u003cli\u003eStronger than stock with 1.5\" x .250\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly 7\/8\" Heim joints for long service life\u003c\/li\u003e\n\u003cli\u003eIncludes safety misalignments to reduce stress risers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included in This Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 – Lengths of \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1331?_pos=2\u0026amp;_psq=DOM+1.5\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003e1.5\" x .250\" wall DOM tubing \u003c\/a\u003eeither Standard 54\" Length or the\n\u003cp\u003eLonger 60\" length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 – 7\/8\" Hex Head Weld Bungs (2 \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1674\" rel=\"noopener\" target=\"_blank\"\u003eLH\u003c\/a\u003e, 2 \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1364\" rel=\"noopener\" target=\"_blank\"\u003eRH\u003c\/a\u003e, 14 TPI)\u003c\/li\u003e\n\u003cli\u003e4 – 7\/8\" Jam Nuts (2 \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1069\" rel=\"noopener\" target=\"_blank\"\u003eLH\u003c\/a\u003e, 2 \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1070\" rel=\"noopener\" target=\"_blank\"\u003eRH\u003c\/a\u003e, 14 TPI)\u003c\/li\u003e\n\u003cli\u003e4 – 7\/8\" Chromoly Heims (2 \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1298\" rel=\"noopener\" target=\"_blank\"\u003eLH\u003c\/a\u003e, 2 \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1303\" rel=\"noopener\" target=\"_blank\"\u003eRH\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e2 –\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1316\" rel=\"noopener\" target=\"_blank\"\u003e 7\/8\" to 3\/4\" Stainless Safety Misalignments\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 – \u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1365?_pos=3\u0026amp;_psq=7%2F8%22+to+3%2F4%22+Stainless+Misalignments\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003e7\/8\" to 3\/4\" Stainless Misalignments\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 –\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r2095\" rel=\"noopener\" target=\"_blank\"\u003e 7\/8\" to 3\/4\" Stainless Tie Rod Misalignments\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable Options\u003c\/h4\u003e\n\u003ch5\u003eTie Rod Tubing Length:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 54\" Length\u003c\/li\u003e\n\u003cli\u003eLonger 60\" Length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMisalignment Size:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4\" Misalignments\u003c\/li\u003e\n\u003cli\u003e5\/8\" Misalignments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eToyotas with close-mounting\/6-shooter knuckles should use 3\/4\" heim steering for smaller head clearance.\u003c\/li\u003e\n\u003cli\u003eRequires welding by a competent person with proper equipment.\u003c\/li\u003e\n\u003cli\u003eCheck steering clearance at full lock before cutting to length—bends may be needed to clear diff covers or sway bar mounts.\u003c\/li\u003e\n\u003cli\u003eExtra DOM is included to allow for cutting errors—cutting is easy, growing tube back is not.\u003c\/li\u003e\n\u003cli\u003e3\/4\" bolts not included; length will vary based on arm thickness.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Standard 54\" Length \/ 3\/4\" Misalignments","offer_id":48324653777053,"sku":"PN1306-Kit-6","price":396.83,"currency_code":"USD","in_stock":true},{"title":"Standard 54\" Length \/ 5\/8\" Misalignments","offer_id":48324653809821,"sku":"PN1306-Kit-5","price":445.5,"currency_code":"USD","in_stock":true},{"title":"Longer 60\" length \/ 3\/4\" Misalignments","offer_id":48324653842589,"sku":"PN1306-Kit-8","price":396.83,"currency_code":"USD","in_stock":true},{"title":"Longer 60\" length \/ 5\/8\" Misalignments","offer_id":48324653875357,"sku":"PN1306-Kit-7","price":445.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1306-7-8-inch-heim-steering-kit-image-2-ruffstuff-specialties.webp?v=1779655920"},{"product_id":"r1138-c","title":"Ford 9\" Simple Swap Kit (Big tube 9\", 2.5\" Springs)","description":"","brand":"Riley Mountain Motorsports","offers":[{"title":"10\" Long","offer_id":48363442733213,"sku":"PN1138-C-Kit-1","price":135.91,"currency_code":"USD","in_stock":true},{"title":"13\" Long","offer_id":48363442765981,"sku":"PN1138-C-Kit-2","price":135.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1138-ford-9-inches-simple-swap-kit-big-tube-9-2-point-5-inches-springs-image-1-ruffstuff-specialties.webp?v=1780418396"},{"product_id":"r1138-b","title":"Ford 8.8 Simple Swap Kit – 31 Spline (Rear Axle)","description":"\u003ch3\u003eFord 8.8 Rear Axle Simple Swap — 31 Spline\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBasic swap kit with plates, perches, U-bolts, and shock brackets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit provides the essential hardware to mount a 31-spline Ford 8.8 rear axle. It includes 3\/8\" A50 steel U-bolt plates with three spring-pin locations, matching spring perches, four 5\/8\" U-bolts (10\" × 3-1\/4\"), and a pair of shock brackets. Components are matched so you can set center-pin position and pinion angle without sourcing parts individually.\u003c\/p\u003e\n\u003cp\u003eTypical donor axles are found in Ford Explorers, F-150 trucks, and Broncos—verify tube diameter (3.25\"), spring spacing, and axle width before welding. Use the three pin holes to fine-tune wheelbase, and select U-bolt length based on spring pack height and plate stack. After installation, torque U-bolts in a cross pattern and re-torque after initial miles or trail use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1138\u003c\/li\u003e\n\u003cli\u003eFor 31-spline Ford 8.8 rear axle swaps\u003c\/li\u003e\n\u003cli\u003ePlates: 3\/8\" A50 steel with three spring-pin positions\u003c\/li\u003e\n\u003cli\u003ePerches: matched to plates; for 3.25\" axle tubes\u003c\/li\u003e\n\u003cli\u003eU-bolts: 10\" length × 5\/8\" dia × 3-1\/4\" width, with 1\/4\" washers and nuts\u003c\/li\u003e\n\u003cli\u003eIncludes pair of shock brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Leaf spring plates, 3\/8\" A50 steel (three pin positions)\u003c\/li\u003e\n\u003cli\u003e(2) Spring perches (three pin positions; 3.25\" tube)\u003c\/li\u003e\n\u003cli\u003e(2) Shock brackets\u003c\/li\u003e\n\u003cli\u003e(4) U-bolts, 10\" × 5\/8\" × 3-1\/4\", with 1\/4\" laser-cut washers and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eConfirm axle width, spring spacing, and tube diameter before welding. Choose U-bolt length that provides full thread engagement past the nut; trim excess after torque.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"10\" Long","offer_id":48363442864285,"sku":"PN1138-B-Kit-1","price":135.91,"currency_code":"USD","in_stock":true},{"title":"13\" Long","offer_id":48363442897053,"sku":"PN1138-B-Kit-3","price":135.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1138-ford-8-point-8-simple-swap-kit-31-spline-rear-axle-image-1-ruffstuff-specialties.webp?v=1780418398"},{"product_id":"pn2601","title":"Long U-Bolt, 3 5\/8\" X 5\/8\" X 13\"","description":"\u003ch3\u003eLong U-Bolt, 3 5\/8\" x 5\/8\" x 13\"\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e5\/8\" U-bolt for Dana 44 and 3 1\/2\" axle tubes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis long U-bolt is designed for the pumpkin side of a Dana 44 or any axle with a 3 1\/2\" diameter tube. It uses 5\/8\" (.625) rolled threads for added strength and includes 5\" of thread length to ensure proper fitment on spring-under setups. Extra thread can be trimmed after installation.\u003c\/p\u003e\n\u003cp\u003eMade from Grade 8 material, these U-bolts are built for strength and durability. They come with the correct hardware for installation, and our U-bolt plates are designed around 5\/8\" hardware. Drilling may be required for proper fitment. Sold individually, so order the correct quantity for your axle.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2601\u003c\/li\u003e\n\u003cli\u003eFits Dana 44 pumpkin side and 3 1\/2\" axle tubes\u003c\/li\u003e\n\u003cli\u003e5\/8\" (.625) rolled threads for maximum strength\u003c\/li\u003e\n\u003cli\u003e5\" of thread length for spring-under setups\u003c\/li\u003e\n\u003cli\u003eGrade 8 material for strength and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Long U-bolt – 3 5\/8\" x 5\/8\" x 13\"\u003c\/li\u003e\n\u003cli\u003e(2) U Bolt Nuts 5\/8\"-18 TPI\u003c\/li\u003e\n\u003cli\u003e(2) U Bolt Washer 5\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eU-bolts are sold individually—order the correct quantity for your axle.\u003c\/li\u003e\n\u003cli\u003eIf the U-bolt does not fit your plate, drill the plate holes to 5\/8\".\u003c\/li\u003e\n\u003cli\u003eCut excess thread length after installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363451383965,"sku":"PN2601-Kit-1","price":14.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2601-long-u-bolt-3-5-8-x-5-8-x-13-inches-image-1-ruffstuff-specialties.webp?v=1780418677"},{"product_id":"r2590","title":"Dana 44 GM Big Bearing Forged Front Spindle","description":"\u003ch3\u003eDana 44 GM Big Bearing Spindle\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement Spindle for Dana 44 Front Axles with Big Bearing Hubs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a new replacement Dana 44 spindle for GM-style big bearing applications. It features a 6-bolt flange pattern and is compatible with a wide range of GM, Jeep, and Dodge trucks and SUVs using Dana 44 front axles with \"big bearing\" hubs. Sold individually.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2590\u003c\/li\u003e\n\u003cli\u003e6-bolt hole mounting pattern\u003c\/li\u003e\n\u003cli\u003eFits Dana 44 front axles with big bearing hubs\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1977–1980 GM K5, K10, K15, and Suburban (Dana 44 w\/ big bearing hubs)\u003c\/li\u003e\n\u003cli\u003e1977–1991 Jeep J10, J20, Cherokee, Wagoneer, and Grand Wagoneer (Dana 44 w\/ big bearing hubs)\u003c\/li\u003e\n\u003cli\u003e1986–1993 Dodge W100, W150, W200, W250, and Ramcharger (Dana 44 w\/ big bearing hubs)\u003c\/li\u003e\n\u003cli\u003eTimken Bearings: (Set 38 Inner \u0026amp; Set 45 Outer)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363452629149,"sku":"PN2590","price":111.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2590-dana-44-gm-big-bearing-spindle-4.jpg?v=1780418706"},{"product_id":"r2365","title":"Lube Locker Ford 9\" Differential Gasket","description":"\u003ch3\u003eFord 9\" Differential Gasket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReusable gasket for Ford 9\" third members—no RTV required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis gasket is designed for Ford 9\" third members and is built with a rubber-coated aluminum core that delivers a dependable seal. It eliminates the need for RTV, saving time and preventing messy cleanup. With proper care, these gaskets can be reused multiple times, making them both reliable and cost-effective.\u003c\/p\u003e\n\u003cp\u003eLube Locker gaskets are trusted by racers, off-roaders, and mechanics because they simplify service—no scraping, no RTV, and no wasted time. They’re the proven choice when you need a durable, reusable solution for your Ford 9\" differential.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2365\u003c\/li\u003e\n\u003cli\u003eFits Ford 9\" third members\u003c\/li\u003e\n\u003cli\u003eRubber-coated aluminum core for superior sealing\u003c\/li\u003e\n\u003cli\u003eReusable with proper care\u003c\/li\u003e\n\u003cli\u003eNo RTV or gasket scraping required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458592925,"sku":"PN2365","price":29.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2365-lube-locker-ford-9-inches-differential-gasket-image-1-ruffstuff-specialties.jpg?v=1780418853"},{"product_id":"r2360","title":"Lube Locker Ford 8.8\" Differential Gasket","description":"\u003ch3\u003eFord 8.8 Differential Cover Gasket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReusable gasket for Ford 8.8 axles—no RTV required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis gasket is designed for Ford 8.8 differential covers and is built with a rubber-coated aluminum core that delivers a strong, lasting seal. Unlike RTV, it eliminates messy cleanup and scraping, making maintenance faster and easier. With reasonable care, these gaskets can be reused multiple times, saving both time and cost.\u003c\/p\u003e\n\u003cp\u003eLube Locker gaskets are proven by racers, off-roaders, and mechanics as the better option over RTV or paper gaskets. They provide consistent sealing performance while simplifying service—making them the go-to choice for reliable differential maintenance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2360\u003c\/li\u003e\n\u003cli\u003eFits Ford 8.8 differential covers\u003c\/li\u003e\n\u003cli\u003eRubber-coated aluminum core for superior sealing\u003c\/li\u003e\n\u003cli\u003eReusable with proper care\u003c\/li\u003e\n\u003cli\u003eNo RTV or gasket scraping required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458658461,"sku":"PN2360","price":29.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2360-lube-locker-ford-8-point-8-inches-differential-gasket-image-1-ruffstuff-specialties.jpg?v=1780418857"},{"product_id":"r2355","title":"Lube Locker Dana 44 Gasket","description":"\u003ch3\u003eDana 44 Differential Cover Gasket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReusable gasket for Dana 44 differentials—no RTV required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis gasket is designed for Dana 44 differential covers and is constructed with a rubber-coated aluminum core for a strong and lasting seal. It eliminates the need for RTV, providing a cleaner and faster installation. With proper care, these gaskets can be reused multiple times, making them a durable and cost-effective choice.\u003c\/p\u003e\n\u003cp\u003eLube Locker gaskets require no scraping or cleanup, saving time during service while delivering consistent performance. Trusted by racers, off-roaders, and mechanics, they are the proven upgrade over RTV or paper gaskets.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2355\u003c\/li\u003e\n\u003cli\u003eFits Dana 44 differential covers\u003c\/li\u003e\n\u003cli\u003eRubber-coated aluminum core for superior sealing\u003c\/li\u003e\n\u003cli\u003eReusable with proper care\u003c\/li\u003e\n\u003cli\u003eNo RTV or gasket scraping required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458789533,"sku":"PN2355","price":29.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2355-lube-locker-dana-44-gasket-image-1-ruffstuff-specialties.jpg?v=1780418864"},{"product_id":"r2145","title":"Dana 44 Y-Link \u0026 High Steer Kit (GM 1 Ton)","description":"\u003ch3\u003eDana 44 Y-Link \u0026amp; High Steer Kit (GM 1 Ton)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComplete High Steer Y-Link Steering Kit for Dana 44 Axles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Y-link steering kit is ideal for rigs where a true crossover setup won’t work due to panhard\/track bar length limitations. By mounting the drag link at the Y-connection instead of the high steer arm, this system allows for a shorter panhard bar and easier packaging. Simple to set up, strong enough for abuse, and ideal for tight engine bays and suspension layouts.\u003c\/p\u003e\n\u003cp\u003eBuilt using 1.5\" x .25\" DOM tubing and GM 1-ton tie rod ends. Hex head bungs make adjustments easy with a crescent wrench. High steer arms are machined with proper Ackerman angle and include dual holes for hydraulic assist options. Compatible with Reid knuckles or stock knuckles (just ignore the 4th hole if unused).\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2145\u003c\/li\u003e\n\u003cli\u003eY-link design allows shorter panhard bar for tight setups\u003c\/li\u003e\n\u003cli\u003e1.5\" x .25\" wall DOM tubing for tie rod and drag link\u003c\/li\u003e\n\u003cli\u003eHex head bungs for tool-friendly adjustability\u003c\/li\u003e\n\u003cli\u003eGM 1-ton TREs – includes high angle and Y-link specific ends\u003c\/li\u003e\n\u003cli\u003eHigh steer arms with proper Ackerman angle and dual holes for hydro assist\u003c\/li\u003e\n\u003cli\u003eArms drilled for 3-stud and Reid 4-stud knuckles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 54\" x 1.5\" x .25\" wall DOM tubing (tie rod)\u003c\/li\u003e\n\u003cli\u003e(1) 43\" x 1.5\" x .25\" wall DOM tubing (drag link)\u003c\/li\u003e\n\u003cli\u003e(2) RH 7\/8\"-18 Hex Head Weld Bungs\u003c\/li\u003e\n\u003cli\u003e(2) LH 7\/8\"-18 Hex Head Weld Bungs\u003c\/li\u003e\n\u003cli\u003e(2) RH 7\/8\"-18 Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH 7\/8\"-18 Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) GM 1 Ton Tie Rod Ends – 1 for Y-link, 2 standard, 1 high-angle for pitman arm\u003c\/li\u003e\n\u003cli\u003e(2) Dana 44 High Steer Arms (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003e(8) Dana 44 High Steer Arm 10.9 Studs and Cone Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Due to high demand, please allow a 3–5 business day turnaround on steering kits.\u003cbr\u003eWelding required. Make sure installation is done with proper tools and technique. Always test steering clearance at full lock before final cutting or welding.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363462557853,"sku":"PN2145-Kit-1","price":829.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2145-dana-44-y-link-high-steer-kit-gm-1-ton-ruffstuff-specialties-1.webp?v=1780418965"},{"product_id":"r2144","title":"Dana 44 Crossover Kit (1 Ton)","description":"\u003ch3\u003eDana 44 Crossover Kit (1 Ton)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFactory-Style Steering Upgrade with 1-Ton Components and Hex Adjusters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis crossover steering kit mimics the factory setup but steps it up with easier adjustability and much stronger materials. Built with 1.5\" x .25\" wall DOM tubing and beefy GM 1-ton tie rod ends, this system offers both strength and serviceability. Hex head bungs allow you to use a crescent wrench for adjustments—no pipe wrenches gouging your tubing or killing your paint. Can be used with high steer arms and features standard GM taper.\u003c\/p\u003e\n\u003cp\u003eThis is a DIY-style kit and includes extra DOM tubing to allow for fitment changes or error correction. Be sure to test steering clearance at full lock before final cutting or welding.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2144\u003c\/li\u003e\n\u003cli\u003eFactory-style crossover setup using GM 1-ton components\u003c\/li\u003e\n\u003cli\u003e1.5\" x .25\" wall DOM tubing for strength\u003c\/li\u003e\n\u003cli\u003eHex head bungs allow easy adjustment without damage\u003c\/li\u003e\n\u003cli\u003eHigh-angle tie rod ends (ES2027L \u0026amp; ES2027R)\u003c\/li\u003e\n\u003cli\u003eIncludes Dana 44 passenger-side high steer arm\u003c\/li\u003e\n\u003cli\u003eExtra tubing length provided for safe trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 43\" of 1.5\" x .25\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003e(1) RH 7\/8\"-18 Hex Head Weld Bung\u003c\/li\u003e\n\u003cli\u003e(1) LH 7\/8\"-18 Hex Head Weld Bung\u003c\/li\u003e\n\u003cli\u003e(1) RH 7\/8\"-18 Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH 7\/8\"-18 Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) GM 1 Ton Tie Rod End – High Angle (ES2027L)\u003c\/li\u003e\n\u003cli\u003e(1) GM 1 Ton Tie Rod End – High Angle (ES2027R)\u003c\/li\u003e\n\u003cli\u003e(1) Dana 44 High Steer Arm – Passenger Side\u003c\/li\u003e\n\u003cli\u003e(4) Dana 44 High Steer Arm Studs \u0026amp; Cone Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Due to high demand, please allow a 3–5 business day turnaround on steering kits.\u003cbr\u003eWelding required. Make sure installation is done with proper tools and technique. Always check steering clearance at full lock before final cutting or welding.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363462590621,"sku":"PN2144-Kit-1","price":413.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2144-dana-44-crossover-kit-1-ton-ruffstuff-specialties-3.webp?v=1780418967"},{"product_id":"r2143","title":"Dana 44 Crossover \u0026 High Steer Kit (1 Ton)","description":"\u003ch3\u003eDana 44 Crossover \u0026amp; High Steer Kit (1 Ton)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty DIY Steering Kit with High Steer Arms for Dana 44\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 1-ton crossover and high steer kit is built with serious trail abuse in mind. Using 1.5\" x .25\" wall DOM tubing, hex head bungs for easy adjustability, and GM 1-ton tie rod ends, this kit handles the hits. The high steer arms are double-drilled for hydraulic or assist setups and machined with the correct Ackerman angle. Arms are also pre-drilled for Reid knuckles—just ignore the extra hole if you’re running stock knuckles.\u003c\/p\u003e\n\u003cp\u003eThis is a DIY-style kit—some welding and fabrication required. DOM tubing is supplied longer than needed to account for fitment and any setup changes. Be sure to test fit and check clearances at full steering lock before cutting or final welding.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2143\u003c\/li\u003e\n\u003cli\u003e1.5\" x .25\" DOM tubing (2 lengths included)\u003c\/li\u003e\n\u003cli\u003eGM 1-ton tie rod ends: 2 standard, 2 high-angle\u003c\/li\u003e\n\u003cli\u003eHex head weld-in bungs for easy adjustment\u003c\/li\u003e\n\u003cli\u003eIncludes jam nuts and weld bungs (RH \u0026amp; LH thread)\u003c\/li\u003e\n\u003cli\u003eMachined high steer arms with correct Ackerman angle\u003c\/li\u003e\n\u003cli\u003eDual-drilled high steer arms for hydraulic assist\u003c\/li\u003e\n\u003cli\u003ePre-drilled for Reid knuckles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 54\" length of 1.5\" x .25\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003e(1) 43\" length of 1.5\" x .25\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003e(2) RH 7\/8\"-18 Hex Head Weld Bungs\u003c\/li\u003e\n\u003cli\u003e(2) LH 7\/8\"-18 Hex Head Weld Bungs\u003c\/li\u003e\n\u003cli\u003e(2) RH 7\/8\"-18 Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH 7\/8\"-18 Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) GM 1 Ton Tie Rod Ends (Standard)\u003c\/li\u003e\n\u003cli\u003e(2) GM 1 Ton Tie Rod Ends (High Angle – ES2027L \u0026amp; ES2027R)\u003c\/li\u003e\n\u003cli\u003e(2) Dana 44 High Steer Arms (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003e(8) Dana 44 High Steer Arm 10.9 Studs and Cone Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Due to high demand, please allow a 3–5 business day turnaround on steering kits.\u003cbr\u003eWelding required. Make sure installation is done with proper tools and technique. Always check steering clearance at full lock before final cutting or welding.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363462623389,"sku":"PN2143-Kit-1","price":829.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2143-dana-44-crossover-and-high-steer-kit-1-ton-image-1-ruffstuff-specialties.webp?v=1780418969"},{"product_id":"r2033","title":"U-Bolt Plates (2.25\" Springs)","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch4\u003eU-Bolt Plates (2.25\" Springs)\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty plates designed specifically for Early Ford Bronco builds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese U-bolt retention plates are made for Early Ford Bronco applications (1966–1977) with 2.25\" wide leaf springs. Built to handle the demands of serious off-road use, they provide a rock-solid foundation for your suspension system while offering wheelbase adjustability for custom builds. The reinforced design with angled ends delivers superior lateral strength compared to flat plates, making them ideal for Broncos that see hard trail use.\u003c\/p\u003e\n\u003cp\u003eFits 2.5\" to 3.5\" axle tube diameters and features three different mounting positions for wheelbase adjustment. Each plate is precision-cut and ready for installation on your Early Bronco build.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2033\u003c\/li\u003e\n\u003cli\u003eFitment: Early Ford Bronco 1966–1977, 2.25\" leaf springs\u003c\/li\u003e\n\u003cli\u003eMaterial: 3\/8\" thick HR P\u0026amp;O steel plate with 45-degree angled ends\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.5\"–3.5\" axle tube diameter compatibility\u003c\/li\u003e\n\u003cli\u003eDesign: Three mounting positions for wheelbase adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat’s Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) U-bolt plates with angled ends\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWashers and nuts for complete installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363467931805,"sku":"PN2033-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2033-u-bolt-plates-2-point-25-inches-springs-image-1-ruffstuff-specialties.webp?v=1780419038"},{"product_id":"r1991","title":"2.25\" Leaf Spring Perches for 3.25\"-3.5\" Axle Tube (Early Bronco Springs)","description":"\u003ch3\u003e2.25\" Leaf Spring Perches for 3.25\"-3.5\" Axle Tube (Early Bronco Springs)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDial in your wheelbase on solid spring-over perches made for Early Broncos.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Early Ford Bronco builds (1966–1977), these leaf spring perches offer a clean and simple way to mount 2.25” wide leaf springs on larger 3.25\" to 3.5\" axle tubes. They're perfect for spring-over-axle setups and are built with three spring pin mounting positions, allowing you to dial in your wheelbase for better fitment, articulation, or tire clearance. Whether you're restoring, swapping axles, or just refining your suspension geometry, these perches offer the versatility and strength you're after.\u003c\/p\u003e\n\u003cp\u003eMade from heavy-duty steel and sold in pairs, these are built to handle serious trail abuse and keep your leaf spring setup tight and true.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1991\u003c\/li\u003e\n\u003cli\u003eFitment: Early Ford Bronco (1966–1977)\u003c\/li\u003e\n\u003cli\u003eAxle Tube Diameter: Fits 3.25\" to 3.5\"\u003c\/li\u003e\n\u003cli\u003eSpring Width Compatibility: 2.25\"\u003c\/li\u003e\n\u003cli\u003eSpring Pin Options: 3 mounting positions for adjustable wheelbase\u003c\/li\u003e\n\u003cli\u003eApplication: For spring-over-axle configurations\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSold in pairs\u003c\/strong\u003e\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363468292253,"sku":"PN1293-Kit-10","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1991-2-point-25-inches-leaf-spring-perches-for-3-point-25-to-3-point-5-inches-axle-tube-early-bronco-springs-image-1-ruffstuff-specialties.jpg?v=1780419049"},{"product_id":"r1943","title":"Ford Small Block Motor Mounts (289, 302, 351W, 351C)","description":"\u003ch3\u003eFord Small Block Motor Mounts\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBuild-your-way motor mounts for Ford small blocks — ready to fit your exact setup.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese small block motor mounts come unwelded so you can fine-tune the placement of the bushing mount on the base plate. Whether you need to offset left or right, you’ve got the flexibility to get it right for your chassis and drivetrain combo. Once you’re happy with the placement, just weld them in and you’re set with a strong, custom-fit solution.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit a wide range of Ford small block engines, these mounts are a straightforward way to lock in reliability without being stuck to one fixed position. Perfect for custom builds where clearance and alignment matter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1943\u003c\/li\u003e\n\u003cli\u003eUnwelded design allows offset adjustment before final fitment\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction\u003c\/li\u003e\n\u003cli\u003eDIY-friendly — weld once positioned for your setup\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of Ford small block motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eFits Ford small block engines: 289, 302, 351 Cleveland, and 351 Windsor. Welding required for installation. Test-fit before final weld to ensure proper alignment.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363471110301,"sku":"PN1943-Kit-1","price":130.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1943-ford-small-block-motor-mounts-289-302-351w-351c-image-1-ruffstuff-specialties.webp?v=1780419079"},{"product_id":"r1386","title":"Ford 9\" Factory Back Truss","description":"\u003ch3\u003eFord 9\" Factory Back Truss\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFactory 9\" housing? This brings our crowned truss strength to the stock game.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur well-known crown-shaped truss design isn’t just for custom housings anymore — this kit adapts it for factory Ford 9\" housings without compromising strength or weight. Instead of the typical flat-back profile, this truss uses four strategic bends to drastically increase rigidity across the rear. It’s long enough to reach the brake brackets, eliminating the usual weak spots where other trusses fall short. Built from .135\" steel, it strikes a balance between durability and weight savings — thicker than 1\/8\" but not overkill.\u003c\/p\u003e\n\u003cp\u003eWhat really sets this design apart is the way it mounts. Instead of focusing heat on one side of the tube, the truss runs the full width of the axle, allowing welds 180 degrees apart. That means far less risk of axle warp during installation. It’s a practical, purpose-built approach made for guys who care about keeping things true and tight the first time around.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1386\u003c\/li\u003e\n\u003cli\u003eDesigned for factory Ford 9\" axle housings\u003c\/li\u003e\n\u003cli\u003eCrown shape adds significant rigidity vs flat-back trusses\u003c\/li\u003e\n\u003cli\u003eConstructed from .135\" steel for optimal strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eFull-length design reaches brake brackets to avoid weak points\u003c\/li\u003e\n\u003cli\u003eWide-mount truss reduces axle warping by balancing weld heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eDue to factory Ford 9\" housing variations, some trimming or shortening of the truss may be required during installation.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363483988125,"sku":"PN1386-Kit-1","price":167.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1386-ford-9-inch-factory-back-truss-ruffstuff-specialties-1.webp?v=1780419365"},{"product_id":"pn1363","title":"Dana 44 Front Axle Simple Swap Kit","description":"\u003ch3\u003eDana 44 Front Axle Swap Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeaf Spring Mount Kit for Dana 44 Front Axles with 2.5\" Springs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis axle swap kit is built for Dana 44 front axles running 2.5\" wide leaf springs. It's available for either 2.75\" or 3\" axle tubes—check your axle before ordering. Most 5- and 6-lug Dana 44s use 2.75\" tubes, while most 8-lug axles use 3\". Includes spring plates, perches, U-bolts, and weld-on shock brackets sized for 1.5\" ID bushings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1363\u003c\/li\u003e\n\u003cli\u003eFits Dana 44 front axles with 2.5\" wide leaf springs\u003c\/li\u003e\n\u003cli\u003eAvailable for 2.75\" or 3.0\" axle tube diameters\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 5\/8\" U-bolts with hardware included\u003c\/li\u003e\n\u003cli\u003eWeld-on shock brackets for 1.5\" ID bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Leaf spring plates for 2.5\" springs\u003c\/li\u003e\n\u003cli\u003e(1) Spring perch – 2.5\" wide\u003c\/li\u003e\n\u003cli\u003e(2) Shock brackets – 1.5\" ID\u003c\/li\u003e\n\u003cli\u003e(3) U-bolts – 10\" x 5\/8\" x 3\" or 2.75\" with hardware\u003c\/li\u003e\n\u003cli\u003e(1) U-bolt – 10\" x 5\/8\" x 3-5\/8\" with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable Kit Options\u003c\/h4\u003e\n\u003ch5\u003eAxle Tube Size\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2.75\" axle tube\u003c\/li\u003e\n\u003cli\u003e3\" axle tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Welding required. Make sure installation is done with proper tools and technique.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"2.75\" axle tube","offer_id":48363485003933,"sku":"PN1363-Kit-1","price":139.32,"currency_code":"USD","in_stock":true},{"title":"3\" axle tube","offer_id":48363485036701,"sku":"PN1363-Kit-2","price":139.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1363-dana-44-front-axle-simple-swap-kit-ruffstuff-specialties-1.webp?v=1780419388"},{"product_id":"pn1328","title":"Ford 8.8 \/ Dana 60 \/ Ford 9\" Spring Perch Pair","description":"\u003ch3\u003eFord 8.8 \/ Dana 60 \/ Ford 9\" Spring Perches\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e7.75\" long × 2.5\" wide weld-on perches with 3 spring pin positions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese perches are CNC laser cut from .25\" HR P\u0026amp;O steel and brake-formed for consistent fit. The 7.75\" length helps control axle wrap, and the 2.5\" width provides a stable spring platform. Three spring pin holes allow small wheelbase adjustments without re-drilling your springs.\u003c\/p\u003e\n\u003cp\u003ePerches are profiled for 3.25\" axle tubes and include three 1\/16\" nubs so they also seat a 3.125\" (small Ford 9\") tube out of the box. Grind off the nubs to fit Ford 8.8, Dana 60, or Ford 9\" (3.25\") housings; these are for spring-over applications only and are sold in pairs. Set pinion angle and perch orientation during mock-up, then weld fully for permanent installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1328\u003c\/li\u003e\n\u003cli\u003eMaterial: .25\" (1\/4) HR P\u0026amp;O steel, CNC laser cut and formed\u003c\/li\u003e\n\u003cli\u003eLength: 7.75\"; Width: 2.5\"\u003c\/li\u003e\n\u003cli\u003eAxle tube fit: 3.25\" (with removable 1\/16\" nubs for 3.125\")\u003c\/li\u003e\n\u003cli\u003eThree spring pin locations for wheelbase adjustment\u003c\/li\u003e\n\u003cli\u003eSpring-over application\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Spring perches for one axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eVerify axle diameter before welding; leave nubs in place for 3.125\" tubes and remove them for 3.25\" tubes (Ford 8.8, Dana 60, Ford 9\"). These are for spring-over installs only—set pinion angle, center pin location, and perch clocking during mock-up. Tack, cycle suspension, then weld fully and torque U-bolts per spec.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363488477341,"sku":"PN1328-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1328-ford-8-8-dana-60-ford-9-inch-spring-perch-pair-ruffstuff-specialties-1.webp?v=1780419430"},{"product_id":"pn1263","title":"Ford 9\" Weld On Disc Brake Bracket Pair 2.75-3.0\" Axle","description":"\u003ch3\u003eFord 9\" Weld-On Disc Brake Bracket Pair (2.75\"–3.0\" Axle Tubes)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, proven disc brake brackets for Ford 9\" with 11.75\" rotors and common GM calipers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese 3\/8\" thick weld-on brackets are designed to fit axle tubes from 2.75\" to 3.0\" in diameter. They're built around the 11.75\" diameter Bronco rotor (5 on 5.5\" pattern) and the widely available '73–'87 Chevy 3\/4-ton 4x4 front calipers — a combo that's affordable, proven, and easy to service. You can also use aftermarket calipers with 7.05\" pin spacing if you're upgrading. These brackets are sold in pairs and make a clean, reliable disc brake conversion possible with minimal fabrication.\u003c\/p\u003e\n\u003cp\u003eTo run this setup, you'll need 15\" steel wheels with no more than 4\" backspacing. These brackets pair well with either GM dual bleeder calipers or Cadillac Eldorado units with a parking brake. If you’re using slip-on rotors, turning down the axle flange may be necessary depending on your shaft diameter. NAPA rotor and caliper part numbers are provided below for reference and easy sourcing.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1263\u003c\/li\u003e\n\u003cli\u003eFits 2.75\"–3.0\" axle tube diameters\u003c\/li\u003e\n\u003cli\u003eWorks with 11.75\" Bronco rotors (5x5.5\")\u003c\/li\u003e\n\u003cli\u003eAccepts GM 3\/4-ton calipers or others with 7.05\" pin spacing\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick mild steel, weld-on design\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eRequires 15\" steel wheels with max 4\" backspacing. If using slip-over rotors, axle flange may need to be machined down. Recommended calipers: LH – N4674 or N4597, RH – N4673 or N4596. Recommended rotor: NB 4885611 or UP 85611.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363493490845,"sku":"PN1263-Kit-1","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1263-ford-9-inch-weld-on-disc-brake-bracket-pair-2-75-3-0-axle-ruffstuff-specialties-2.webp?v=1780419491"},{"product_id":"pn1261","title":"Ford 9\" Weld On Disc Brake Bracket Pair 3.25\"-3.5\" Axle","description":"\u003ch3\u003eFord 9\" Weld-On Disc Brake Bracket Pair (3.25\"–3.5\" Axle Tubes)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA rugged, DIY-friendly disc brake upgrade for your big-tube Ford 9\".\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese weld-on brackets are built from 3\/8\" steel and made to fit axle tubes from 3.25\" to 3.5\" in diameter. Designed to work with common and affordable components like 11.75\" Bronco rotors and '73–'87 Chevy 3\/4-ton 4x4 front calipers, they offer a no-nonsense way to ditch drum brakes. You can also run any performance caliper with 7.05\" pin spacing, giving you flexibility depending on your rig’s needs and budget.\u003c\/p\u003e\n\u003cp\u003ePerfect for crawlers, tow rigs, and hot rods alike, these brackets are sold in pairs and can handle real-world abuse. As with any brake swap, proper mock-up is key — rotate for caliper clearance (typically between 9 and 12 o'clock), and tack before final welding. If you're using slip-over rotors, turning down the axle flange may be required. 15\" wheels with more than 4\" backspacing may run into caliper clearance issues.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1261\u003c\/li\u003e\n\u003cli\u003eFits 3.25\"–3.5\" axle tube diameters\u003c\/li\u003e\n\u003cli\u003eAccepts 11.75\" Bronco rotors (5x5.5 bolt pattern)\u003c\/li\u003e\n\u003cli\u003eCompatible with GM 3\/4-ton calipers or any 7.05\" pin spacing caliper\u003c\/li\u003e\n\u003cli\u003eMade from 3\/8\" thick steel\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eRequires 15\" wheels with ≤4\" backspacing for caliper clearance. For slip-over rotors, axle flange may need to be machined. Recommended calipers: LH – N4674 or N4597, RH – N4673 or N4596. Recommended rotors: NB 4885611 (Premium) or UP 85611 (Ultra Premium). Follow mock-up instructions before welding to ensure correct fit and pad alignment.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363493523613,"sku":"PN1261-Kit-1","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1261-ford-9-inch-weld-on-disc-brake-bracket-pair-3-25-3-5-axle-ruffstuff-specialties-1.webp?v=1780419492"},{"product_id":"r1253","title":"Shackle Hanger Pair","description":"\u003ch4\u003eShackle Hanger Pair\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty shackle hangers for leaf spring suspension systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese shackle hangers provide the mounting points needed for proper leaf spring suspension operation. Essential components for maintaining correct spring geometry and ensuring reliable performance under demanding off-road conditions, they're built to handle the loads and stresses of serious trail use.\u003c\/p\u003e\n\u003cp\u003eConstructed from heavy-duty steel with precision welding and engineered mounting points, the robust design ensures long-lasting durability while maintaining proper suspension alignment and function.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1253\u003c\/li\u003e\n\u003cli\u003eFitment: Universal leaf spring applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel construction with precision welding\u003c\/li\u003e\n\u003cli\u003eEngineered for proper spring geometry\u003c\/li\u003e\n\u003cli\u003eSold as a pair for complete suspension setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Shackle hangers (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEssential for proper leaf spring suspension operation\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper alignment\u003c\/li\u003e\n\u003cli\u003eBuilt for demanding off-road applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"2 5\/8\" Wide x 1\/2\" Sleeve ID","offer_id":48363493687453,"sku":"PN1253-Kit-1","price":62.7,"currency_code":"USD","in_stock":true},{"title":"2 5\/8\" x 9\/16\" Sleeve ID","offer_id":48363493720221,"sku":"PN1253-Kit-6","price":62.7,"currency_code":"USD","in_stock":true},{"title":"2-3\/4\" Wide x 1\/2\" Sleeve ID","offer_id":48363493752989,"sku":"PN1253-Kit-5","price":62.7,"currency_code":"USD","in_stock":true},{"title":"2 3\/4\" x 9\/16\" Sleeve ID","offer_id":48363493785757,"sku":"PN1253-Kit-7","price":62.7,"currency_code":"USD","in_stock":true},{"title":"3\" Wide x 1\/2\" Sleeve ID","offer_id":48363493818525,"sku":"PN1253-Kit-2","price":62.7,"currency_code":"USD","in_stock":true},{"title":"3-3\/16\" Wide x 1\/2\" Sleeve ID","offer_id":48363493851293,"sku":"PN1253-Kit-3","price":62.7,"currency_code":"USD","in_stock":true},{"title":"3 3\/16\" x 9\/16\" Sleeve ID","offer_id":48363493884061,"sku":"PN1253-Kit-9","price":62.7,"currency_code":"USD","in_stock":true},{"title":"3\" x 9\/16\" Sleeve ID","offer_id":48363493916829,"sku":"PN1253-Kit-8","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1253-main.jpg?v=1780419494"},{"product_id":"pn1252","title":"Universal Shackle Flip Kit","description":"\u003ch3\u003eUniversal Shackle Flip Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFlip your shackles for improved suspension geometry and ground clearance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Universal Shackle Flip Kit allows you to relocate your leaf spring shackles from under the frame to on top of the frame, providing additional ground clearance and improved suspension articulation. Perfect for off-road builds where every inch of clearance matters, this kit helps prevent damage to your shackles and mounting points while maintaining proper suspension function.\u003c\/p\u003e\n\u003cp\u003eConstructed from heavy-duty steel with precision-cut mounting plates and reinforcement gussets. The kit includes all necessary hardware for a complete installation and is designed to work with most leaf spring suspension setups. Welding required for permanent installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1252\u003c\/li\u003e\n\u003cli\u003eFitment: Universal application for most leaf spring vehicles\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel construction with reinforcement gussets\u003c\/li\u003e\n\u003cli\u003eWeight: 20 pounds complete kit\u003c\/li\u003e\n\u003cli\u003eDesign: Bolt-on mounting plates with welded installation required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ccenter\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0602\/2324\/files\/R1252_Diagram.webp?v=1769623344\"\u003e\u003c\/center\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x Shackle flip mounting plates\u003c\/li\u003e\n\u003cli\u003e2x Reinforcement gussets\u003c\/li\u003e\n\u003cli\u003e4x Grade 8 bolts\u003c\/li\u003e\n\u003cli\u003e4x Grade 8 washers\u003c\/li\u003e\n\u003cli\u003e4x 5\/8 nut 18TPI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWelding required for permanent installation of mounting plates to frame\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"480\" data-end=\"616\"\u003eCustomer provided measurements will be used for cutting\/building. Please verify all measurements before submitting. All sales are final.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"4\"","offer_id":48363494080669,"sku":"PN1252-Kit-1","price":249.7,"currency_code":"USD","in_stock":true},{"title":"5\"","offer_id":48363494113437,"sku":"PN1252-Kit-2","price":249.7,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":48363494146205,"sku":"PN1252-Kit-3","price":249.7,"currency_code":"USD","in_stock":true},{"title":"7\"","offer_id":48363494178973,"sku":"PN1252-Kit-4","price":249.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1252_00-3.webp?v=1780419496"},{"product_id":"pn1250","title":"U-Bolt, 3\" X 5\/8\" X 10\"","description":"\u003ch3\u003eU-Bolt, 3\" X 5\/8\" X 10\"\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty Grade 8 U-bolt designed for 3\" diameter axles with extra-long threading.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis U-bolt is engineered for 3\" diameter axle applications, providing extra-long 5\" threading that you can trim to your exact needs. Built to Grade 8 specifications with rolled threads for maximum strength, it's the reliable solution for securing axle components in demanding off-road builds where precision fitment and durability are essential.\u003c\/p\u003e\n\u003cp\u003eConstructed from Grade 8 steel with 0.625\" (5\/8\") rolled threads for superior strength and durability. The 3\" width accommodates standard 3\" diameter axle configurations, while the extended 10\" length with 5\" threading ensures proper fitment across various setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1250\u003c\/li\u003e\n\u003cli\u003eFitment: 3\" diameter axles, universal applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Grade 8 steel with rolled threads\u003c\/li\u003e\n\u003cli\u003eDimensions: 3\" width, 5\/8\" diameter, 10\" length, 5\" threading\u003c\/li\u003e\n\u003cli\u003eDesign: Extra-long threading for custom trimming, rolled threads for strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x U-Bolt\u003c\/li\u003e\n\u003cli\u003e2x 5\/8 nut 18TPI\u003c\/li\u003e\n\u003cli\u003e2x Thick cut 1\/4\" washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold individually - order quantity needed for your application\u003c\/li\u003e\n\u003cli\u003eTrim excess threading after installation for perfect fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363494244509,"sku":"PN1250-Kit-1","price":14.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1250-u-bolt-3-x-5-8-x-10-inches-image-1-ruffstuff-specialties.webp?v=1780419499"},{"product_id":"r1248","title":"U-Bolt, 3 5\/8\" X 5\/8\" X 10\"","description":"\u003ch3\u003eU-Bolt, 3 5\/8\" X 5\/8\" X 10\"\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty Grade 8 U-bolt designed for Dana 44 pumpkin side and 3.5\" axle tubes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis U-bolt is engineered specifically for the pumpkin side of Dana 44 axles and any 3.5\" axle tube applications. With extra-long 5\" threading that you can trim to your exact needs, it solves fitment issues that plague standard U-bolts. Built to Grade 8 specifications with rolled threads for maximum strength, it's the reliable solution for securing axle components in demanding off-road builds.\u003c\/p\u003e\n\u003cp\u003eConstructed from Grade 8 steel with 0.625\" (5\/8\") rolled threads for superior strength and durability. The 3.625\" width accommodates Dana 44 pumpkin configurations and 3.5\" axle tubes, while the extended 10\" length with 5\" threading ensures proper fitment across various setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1248\u003c\/li\u003e\n\u003cli\u003eFitment: Dana 44 pumpkin side, 3.5\" axle tubes\u003c\/li\u003e\n\u003cli\u003eMaterial: Grade 8 steel with rolled threads\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.625\" width, 5\/8\" diameter, 10\" length, 5\" threading\u003c\/li\u003e\n\u003cli\u003eDesign: Extra-long threading for custom trimming, rolled threads for strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x U-Bolt\u003c\/li\u003e\n\u003cli\u003e2x 5\/8 nut 18TPI\u003c\/li\u003e\n\u003cli\u003e2x Thick cut 1\/4\" washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold individually - order quantity needed for your application\u003c\/li\u003e\n\u003cli\u003eTrim excess threading after installation for perfect fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363494310045,"sku":"PN1248-Kit-1","price":14.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1248-u-bolt-3-5-8-x-5-8-x-10-inches-image-1-ruffstuff-specialties.webp?v=1780419503"},{"product_id":"pn1246","title":"U-Bolt, 3 1\/4\" X 5\/8\" X 10\"","description":"\u003ch3\u003eU-Bolt, 3 1\/4\" X 5\/8\" X 10\"\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty Grade 8 U-bolt designed for Dana 60\/8.8 axles with extra-long threading.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis U-bolt is engineered to solve common fitment issues with Dana 60\/8.8 axles by providing extra-long 5\" threading that you can trim to your exact needs. Built to Grade 8 specifications with rolled threads for maximum strength, it's the reliable solution for securing axle components in demanding off-road applications where standard U-bolts fall short.\u003c\/p\u003e\n\u003cp\u003eConstructed from Grade 8 steel with 0.625\" (5\/8\") rolled threads for superior strength and durability. The 3.25\" width accommodates standard Dana 60\/8.8 axle configurations, while the extended 10\" length with 5\" threading ensures proper fitment across various setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1246\u003c\/li\u003e\n\u003cli\u003eFitment: Dana 60\/8.8 axles, universal applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Grade 8 steel with rolled threads\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.25\" width, 5\/8\" diameter, 10\" length, 5\" threading\u003c\/li\u003e\n\u003cli\u003eDesign: Extra-long threading for custom trimming, rolled threads for strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x U-Bolt\u003c\/li\u003e\n\u003cli\u003e2x 5\/8 nut 18TPI\u003c\/li\u003e\n\u003cli\u003e2x Thick cut 1\/4\" washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold individually - order quantity needed for your application\u003c\/li\u003e\n\u003cli\u003eTrim excess threading after installation for perfect fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363494375581,"sku":"PN1246-Kit-1","price":14.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1246-u-bolt-3-1-4-x-5-8-x-10-inches-image-1-ruffstuff-specialties.webp?v=1780419506"},{"product_id":"pn1245","title":"U-Bolt, 2 3\/4\" X 5\/8\" X 10\"","description":"\u003ch3\u003eU-Bolt, 2 3\/4\" X 5\/8\" X 10\"\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty Grade 8 U-bolt designed for Dana 44 axles with extra-long threading.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis U-bolt is engineered to solve common fitment issues with Dana 44 axles by providing extra-long 5\" threading that you can trim to your exact needs. Built to Grade 8 specifications with rolled threads for maximum strength, it's the reliable solution for securing axle components in demanding off-road applications where standard U-bolts fall short.\u003c\/p\u003e\n\u003cp\u003eConstructed from Grade 8 steel with 0.625\" (5\/8\") rolled threads for superior strength and durability. The 2.75\" width accommodates standard Dana 44 axle configurations, while the extended 10\" length with 5\" threading ensures proper fitment across various setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1245\u003c\/li\u003e\n\u003cli\u003eFitment: Dana 44 axles, universal applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Grade 8 steel with rolled threads\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.75\" width, 5\/8\" diameter, 10\" length, 5\" threading\u003c\/li\u003e\n\u003cli\u003eDesign: Extra-long threading for custom trimming, rolled threads for strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x U-Bolt\u003c\/li\u003e\n\u003cli\u003e2x 5\/8 nut 18TPI\u003c\/li\u003e\n\u003cli\u003e2x Thick cut 1\/4\" washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold individually - order quantity needed for your application\u003c\/li\u003e\n\u003cli\u003eTrim excess threading after installation for perfect fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363494736029,"sku":"PN1245-Kit-1","price":14.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1245-u-bolt-2-3-4-x-5-8-x-10-inches-image-1-ruffstuff-specialties.webp?v=1780419508"},{"product_id":"r1167","title":"Leaf Spring Hanger With 2.75\" Inner Mounting Width","description":"\u003ch3\u003eLeaf Spring Hanger with 2.75\" Inner Mounting Width\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty spring hanger for 2.5\" wide leaf springs with narrow bushings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis leaf spring hanger is designed for 2.5\" wide springs but with a 2.75\" inner width to accommodate narrow bushing shoulders. Built with an added ramp plate for extra rigidity, the design can also serve as a skid surface when oriented forward or backward. The spring pin is aligned with the leading edge of the bracket, allowing you to extend it past the frame for an easy 1\"+ wheelbase stretch if desired.\u003c\/p\u003e\n\u003cp\u003eStrong, versatile, and simple to weld in, these hangers can be used when mounting 2.5\" springs on just about any vehicle. Sold in pairs.\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1167\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003e2.75\" inner mounting width\u003c\/li\u003e\n\u003cli\u003eWorks with 2.5\" wide leaf springs with narrow bushings\u003c\/li\u003e\n\u003cli\u003e1\/2\" spring bolt hole\u003c\/li\u003e\n\u003cli\u003eRamp plate adds rigidity and doubles as a skid\u003c\/li\u003e\n\u003cli\u003eSpring pin aligned with bracket edge for easy wheelbase stretch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Leaf spring hangers with 2.75\" inner width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote:\u003c\/h4\u003e\n\u003cp\u003eShips raw steel. Requires welding. Clean and coat after install to prevent corrosion.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363498209437,"sku":"PN1167-Kit-1","price":46.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1167-Kit-1-leaf-spring-hanger-with-2-75-inch-inner-mounting-width-ruffstuff-specialties-1.webp?v=1780419578"},{"product_id":"r1155","title":"Fullsize Spring Hangers 3 7\/16\" Inner Mounting Width","description":"\u003ch3\u003eFullsize Spring Hangers – 3 7\/16\" Inner Mounting Width\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty spring hangers for fullsize GM, Ford, and Dodge leaf spring setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese fullsize spring hangers are built to fit 3\" wide leaf springs commonly found in 1-ton and some 3\/4-ton Ford, GM, and Dodge trucks. With an inner width of 3 7\/16\", they’re made to fit springs with factory-style bushings already installed. The included ramp plate increases rigidity and can act as a skid if you're running them rear-facing in a custom suspension setup.\u003c\/p\u003e\n\u003cp\u003eThe pin center aligns with the front edge of the bracket, which means you can gain over an inch of wheelbase by extending the hanger past the frame. Weld them forward or rearward depending on your layout — they’re versatile, strong, and proven in trail and work truck builds alike.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1155-Kit-1\u003c\/li\u003e\n\u003cli\u003eFits 3\" wide leaf springs with bushings (3 7\/16\" ID)\u003c\/li\u003e\n\u003cli\u003eCommon on Ford, GM, Dodge 3\/4-ton and 1-ton trucks\u003c\/li\u003e\n\u003cli\u003eIncludes ramp plate for added strength and skid function\u003c\/li\u003e\n\u003cli\u003eCan add 1\"+ of wheelbase depending on install\u003c\/li\u003e\n\u003cli\u003eWorks mounted forward or rearward\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Fullsize spring hangers\u003c\/li\u003e\n\u003cli\u003e(2) Ramp reinforcement plates\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. These hangers are designed to fit springs with 3 7\/16\" bushing width. The ramp plate reinforces the bracket and can serve as a skid if oriented rearward. Spring pin center is aligned with the leading edge of the bracket for easy wheelbase tuning.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499192477,"sku":"PN1155-Kit-1","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1155-Kit-1-fullsize-spring-hangers-3-7-16ths-inch-inner-mounting-width-ruffstuff-specialties-1.webp?v=1780419598"},{"product_id":"r1147","title":"Ford\/Chevy\/Dodge U-Bolt Plates (3\" Springs)","description":"\u003ch3\u003eFord\/Chevy\/Dodge U-Bolt Plates for 3\" Springs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty U-bolt plates for full-size leaf springs and multiple axle sizes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese U-bolt plates are designed with standard 3\" wide full-size Ford, Chevy, and Dodge leaf springs in mind, but they'll easily accommodate anything from 2.75\" to 3\" wide. Whether you're doing a spring-over or spring-under setup, these plates offer solid strength and fitment flexibility for a wide range of builds.\u003c\/p\u003e\n\u003cp\u003eEach plate is cut from 3\/8\" hot-rolled P\u0026amp;O steel and includes 3 center pin positions, letting you dial in your wheelbase without redrilling. They'll fit axle tubes from 2.5\" up to 4.125\" in diameter, and accept 9\/16\" to 5\/8\" U-bolts — though we always recommend going with 5\/8\" for the added strength. These are made to handle trail abuse, not just look good in a parts bin.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1147\u003c\/li\u003e\n\u003cli\u003eFits spring widths from 2.75\" to 3.0\"\u003c\/li\u003e\n\u003cli\u003eAxle tube fitment: 2.5\" to 4.125\" diameter\u003c\/li\u003e\n\u003cli\u003e3\/8\" HR P\u0026amp;O steel plate, CNC laser cut\u003c\/li\u003e\n\u003cli\u003e3 spring pin mounting positions for wheelbase adjustment\u003c\/li\u003e\n\u003cli\u003eCompatible with 9\/16\" to 5\/8\" U-bolts (5\/8\" recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) U-bolt plates\u003c\/li\u003e\n\u003cli\u003eSold in pairs — one axle set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eThese plates are designed for use with full-size 3\" leaf springs and can be used in spring-over or spring-under applications. They are a weld-free, bolt-on solution when used with appropriate U-bolts (not included).\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499683997,"sku":"PN1147-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1147-ford-chevy-dodge-u-bolt-plates-3-inch-springs-ruffstuff-specialties-1.webp?v=1780419608"},{"product_id":"pn1135","title":"Ford, Chevy, \u0026 Dodge 3\" Wide Spring Perch","description":"\u003ch3\u003eFord, Chevy \u0026amp; Dodge 3\" Wide Spring Perch (Pair)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty 3\" perches built for strength, adjustability, and stability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is one of those parts that seems simple—until you’re breaking welds or chasing axle wrap on a rig that sees real trail time. These 3\" wide perches are built from 1\/4\" hot-rolled P\u0026amp;O steel, laser-cut and brake-formed with precision. They’re designed to handle the abuse of big tires and heavy throttle, giving you a stable spring platform and enough length (8\") to actually help control axle wrap.\u003c\/p\u003e\n\u003cp\u003eEach perch is slotted for 3 spring pin positions, giving you up to 1.5\" of wheelbase adjustability without redrilling or making a mess of your setup. They’re built to fit a 3\" axle tube, commonly found on Ford 9\", but with a little grinder work they’ll fit tubes ±1\/4\" in size. Whether you're working on a classic Chevy, a Dodge swap, or a Ford trail rig, this kit keeps things simple, strong, and easy to dial in.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1135\u003c\/li\u003e\n\u003cli\u003eFits 3.0\" axle tubes (±1\/4\" with minor grinding)\u003c\/li\u003e\n\u003cli\u003e3\" wide perch for stable spring seating\u003c\/li\u003e\n\u003cli\u003e1\/4\" HR P\u0026amp;O steel plate, CNC laser cut\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 spring pin mounting positions for wheelbase adjustability\u003c\/li\u003e\n\u003cli\u003e8\" perch length to help reduce axle wrap\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 3\" wide spring perches\u003c\/li\u003e\n\u003cli\u003eSold in pairs — one axle set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. These are designed specifically for spring-over-axle setups and must be welded to your axle tubes. They are sold in pairs and fit 3.0\" diameter tubes, with minor grinding allowing fitment on tubes up to ±1\/4\".\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499978909,"sku":"PN1135-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1135-ford-chevy-dodge-3-inch-wide-spring-perch-ruffstuff-specialties-1.webp?v=1780419619"},{"product_id":"pn1113","title":"Dana 70 \/ Ford Sterling Simple Swap Kit (3.5\" Tubes)","description":"\u003ch3\u003eDana 70 \/ Ford Sterling Simple Swap Kit (3.5\" Tubes)\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eBasic Swap Kit for Dana 70 or Ford Sterling Rear Axles\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is built for installing Dana 70 or Ford Sterling rear axles with 3.5\" axle tubes and 2.5\" wide leaf springs. It provides the core components needed to complete the swap without unnecessary extras.\u003c\/p\u003e\n\u003cp\u003eAll parts are made from heavy-duty 3\/8\" A50 plate steel and include adjustable spring plates, perches, shock brackets, and all hardware. Ideal for garage builds or trail repairs when simplicity and strength matter most.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1113\u003c\/li\u003e\n\u003cli\u003eFits 3.5\" axle tubes (Dana 70 \/ Sterling)\u003c\/li\u003e\n\u003cli\u003eSpring plates and perches made from 3\/8\" A50 steel\u003c\/li\u003e\n\u003cli\u003eThree spring pin mounting positions for fine-tuning wheelbase\u003c\/li\u003e\n\u003cli\u003eAll hardware included with hardened washers and tall nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Leaf Spring Plates for 2.5\" Springs\u003c\/li\u003e\n\u003cli\u003e(2) Perches – 2.5\" Wide, 3.5\" Axle Tube\u003c\/li\u003e\n\u003cli\u003e(2) Shock Brackets – 1.5\" ID\u003c\/li\u003e\n\u003cli\u003e(4) U-Bolts – 10\" x 5\/8\" x 3.5\" with Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable Kit Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLeaf Spring Width: 2.5\" Wide Springs or 3\" Wide Springs\u003c\/li\u003e\n\u003cli\u003eU-Bolt Length: 10\" Long or 13\" Long\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"2.5\" Wide Springs \/ 10\" Long","offer_id":48363501387933,"sku":"PN1113-Kit-1","price":135.91,"currency_code":"USD","in_stock":true},{"title":"2.5\" Wide Springs \/ 13\" Long","offer_id":48363501420701,"sku":"PN1113-Kit-2","price":135.91,"currency_code":"USD","in_stock":true},{"title":"3\" Wide Springs \/ 10\" Long","offer_id":48363501453469,"sku":"PN1113-Kit-3","price":135.91,"currency_code":"USD","in_stock":true},{"title":"3\" Wide Springs \/ 13\" Long","offer_id":48363501486237,"sku":"PN1113-Kit-4","price":135.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1113-dana-70-ford-sterling-simple-swap-kit-3-5-inch-tubes-ruffstuff-specialties-1.webp?v=1780419640"},{"product_id":"pn1018","title":"14 Bolt \/ Dana 70 \/ Sterling Spring Perches","description":"\u003ch3\u003e14 Bolt \/ Dana 70 \/ Sterling Spring Perches – Pair\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Spring-Over Perches for 3.375″ or 3.5″ Axle Tubes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese perches are designed for heavy-duty spring‑over setups using 14 Bolt, Dana 70, or Sterling axles. Made from ¼″ HRPO steel, they’re laser-cut and press-brake formed for a perfect fit and serious strength.\u003c\/p\u003e\n\u003cp\u003eAt 7.75″ long and 2.5″ wide, they reduce axle wrap and provide a stable platform for leaf springs. Built-in 1\/16″ nubs let them fit 3.375″ axle tubes out of the box — simply grind them off for 3.5″ Dana 70 or Sterling applications. Three spring‑pin hole positions give up to 1″ of wheelbase adjustability.\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1018‑Kit‑1\u003c\/li\u003e\n\u003cli\u003eAxle Fitment: 3.375″ (14 Bolt) or 3.5″ (Dana 70\/Sterling)\u003c\/li\u003e\n\u003cli\u003ePerch Length: 7.75″ — helps reduce axle wrap\u003c\/li\u003e\n\u003cli\u003eWidth: 2.5″ — stable leaf spring platform\u003c\/li\u003e\n\u003cli\u003eSpring Pin Holes: 3 positions for wheelbase tuning (up to 1″)\u003c\/li\u003e\n\u003cli\u003eMaterial: ¼″ thick HRPO mild steel\u003c\/li\u003e\n\u003cli\u003eManufacturing: CNC laser cut and brake-formed\u003c\/li\u003e\n\u003cli\u003eUse Case: Spring-over axle suspension setups\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363506040989,"sku":"PN1018-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1018_14_bolt_dana_70_sterling_spring_perch_13.jpg?v=1780419727"}],"url":"https:\/\/rileymountainmotorsports.com\/collections\/early-and-late-ford-bronco-and-full-size.oembed?page=2","provider":"Riley mountain motorsports","version":"1.0","type":"link"}