{"title":"F-150","description":"\u003cp\u003e\u003cem\u003e[PLACEHOLDER — replace with RMM copy]\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"r1138-c","title":"Ford 9\" Simple Swap Kit (Big tube 9\", 2.5\" Springs)","description":"","brand":"Riley Mountain Motorsports","offers":[{"title":"10\" Long","offer_id":48363442733213,"sku":"PN1138-C-Kit-1","price":135.91,"currency_code":"USD","in_stock":true},{"title":"13\" Long","offer_id":48363442765981,"sku":"PN1138-C-Kit-2","price":135.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1138-ford-9-inches-simple-swap-kit-big-tube-9-2-point-5-inches-springs-image-1-ruffstuff-specialties.webp?v=1780418396"},{"product_id":"r1137","title":"Ford 8.8 Simple Swap Kit – 28 Spline (Rear Axle)","description":"\u003ch3\u003eFord 8.8 Rear Axle Simple Swap — 28 Spline\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBasic swap kit with plates, perches, U-bolts, and shock brackets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit supplies the essentials to mount a 28-spline Ford 8.8 rear axle under a leaf-spring rig. You get 3\/8\" thick A50 steel U-bolt plates with three spring-pin locations, matched 8.8 perches, four 5\/8\" U-bolts with hardware, and a pair of shock brackets. The components are sized to work together so you can set pinion angle, center-pin position, and shock mounts without piecing parts from multiple sources.\u003c\/p\u003e\n\u003cp\u003eFitment is for 2.5\" leaf springs with perches profiled for a 2.75\" axle tube and U-bolts measuring 10\" × 5\/8\" × 2-3\/4\". Many 28-spline 8.8 axles at this width came in Ford Ranger applications; verify your axle width, tube diameter, and spring spacing before welding. If your pack height or plate stack is taller, consider longer U-bolts to maintain full thread engagement and re-torque after shakedown.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1137\u003c\/li\u003e\n\u003cli\u003eFor 28-spline Ford 8.8 rear axle swaps\u003c\/li\u003e\n\u003cli\u003ePlates: 3\/8\" A50 steel with three spring-pin positions\u003c\/li\u003e\n\u003cli\u003ePerches: 2.75\" axle tube, 2.5\" spring width\u003c\/li\u003e\n\u003cli\u003eU-bolts: 10\" length × 5\/8\" dia × 2-3\/4\" width, with 1\/4\" washers and nuts\u003c\/li\u003e\n\u003cli\u003eShock brackets: 1.5\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Leaf spring plates for 2.5\" springs\u003c\/li\u003e\n\u003cli\u003e(2) Perches for 2.75\" axle tube and 2.5\" wide springs\u003c\/li\u003e\n\u003cli\u003e(2) Shock brackets, 1.5\" ID\u003c\/li\u003e\n\u003cli\u003e(4) U-bolts, 10\" × 5\/8\" × 2-3\/4\", with 1\/4\" washers and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eConfirm axle width, tube diameter (2.75\"), spring width (2.5\"), and center-pin location before welding. Use the three pin holes to fine-tune wheelbase, set pinion angle during mock-up, and torque U-bolts evenly in a cross pattern. Re-check torque after initial miles or trail use and verify shock clearance through full travel.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"10\" Long","offer_id":48363442798749,"sku":"PN1137-A-Kit-1","price":131.67,"currency_code":"USD","in_stock":true},{"title":"13\" Long","offer_id":48363442831517,"sku":"PN1137-A-Kit-2","price":131.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1109-main.jpg?v=1780418396"},{"product_id":"r2840","title":"Ford Super Duty 1-Ton Axles Differential Cover Pack","description":"\u003ch3\u003eFord Super Duty 1-Ton Axles Differential Cover Pack\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty protection for both front and rear Super Duty axles in one complete pack.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis pack is built for Ford Super Duty 1-ton trucks, giving you unmatched durability for the axles that take the most abuse. It includes a Super Duty Dana 60 differential cover for the front axle and a Sterling differential cover for the rear axle — ensuring both ends are armored against trail hits and daily wear. Designed for direct fitment, these covers add serious strength where factory components fall short.\u003c\/p\u003e\n\u003cp\u003eEach cover is cut from 3\/8\" plate steel, bent in 8 places for rigidity, and fully welded inside and out. The machined-flat surface guarantees a perfect seal every time, and the kit includes all necessary mounting hardware. With a lifetime warranty backing both covers, you get confidence to push harder knowing your drivetrain is protected.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2840\u003c\/li\u003e\n\u003cli\u003eFits Ford Super Duty 1-ton trucks with Dana 60 front and Sterling rear axles\u003c\/li\u003e\n\u003cli\u003ePack includes both front and rear heavy-duty diff covers\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick ring and 3\/8\" plate steel cover\u003c\/li\u003e\n\u003cli\u003eBent in 8 places for maximum strength\u003c\/li\u003e\n\u003cli\u003eMachined flat for a perfect seal\u003c\/li\u003e\n\u003cli\u003eFully welded inside and out\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on differential covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r2258-kit-2?_pos=1\u0026amp;_psq=R2258\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eFord Super Duty Dana 60 Differential Cover (R2258)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1411-kit-2?_pos=1\u0026amp;_psq=R1411\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eSterling Differential Cover (R1411)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eDirect bolt-on installation. Built specifically for Super Duty Dana 60 front and Sterling rear axles. Lifetime warranty on all differential covers included in this pack. Verify axle type before ordering to ensure correct fitment.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363447845021,"sku":"PN2840-Kit-1","price":313.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2840-ford-super-duty-1-ton-axles-differential-cover-pack-ruffstuff-specialties-1.webp?v=1780418546"},{"product_id":"r2839","title":"Ford 1-Ton Axle Differential Cover Pack (For Older Models)","description":"\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFront Dana 60\/70 and rear Sterling differential covers for Ford truck axles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis pack pairs a Dana 60\/70 front differential cover with a Sterling rear differential cover to protect common heavy-duty Ford axle setups. Both covers use a 3\/8\" ring and a 3\/8\" plate shell bent eight ways, then machined flat and fully welded inside and out for a reliable seal. Each cover includes mounting hardware and is backed by a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eFitment depends on your axle types—use this pack only if your truck runs a Dana 60\/70 front and a Sterling rear axle. Many F-100 and F-150 models came with Ford 8.8\", 9\", or 9.75\" axles; this pack does not fit those housings. Before installation, confirm axle IDs, clean the sealing surface, apply gasket\/RTV as required, torque bolts in a cross pattern, and refill with the correct gear oil.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2839\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick ring for rigidity\u003c\/li\u003e\n\u003cli\u003e3\/8\" plate cover bent 8 ways\u003c\/li\u003e\n\u003cli\u003eMachined absolutely flat for a proper seal\u003c\/li\u003e\n\u003cli\u003eFully welded seams inside and out\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on differential covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePack Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDana 60 \/ Dana 70 Differential Cover (\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1317-kit-2?_pos=1\u0026amp;_psq=R1317%29\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eR1317\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eSterling Differential Cover (\u003ca href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1411-kit-2?_pos=1\u0026amp;_psq=R1411\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eR1411\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eVerify axle types before ordering; this pack fits Dana 60\/70 front and Sterling rear axles only. It does not fit Ford 8.8\", 9\", or 9.75\" housings.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363447943325,"sku":"PN2839-Kit-1","price":313.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2839-ford-1-ton-axle-differential-cover-pack-for-older-models-ruffstuff-specialties-1.webp?v=1780418548"},{"product_id":"pn2838","title":"Ford F100 \u0026 F150 Rear Axle Armor Pack","description":"\u003ch3\u003eFord F100 \u0026amp; F150 Rear Axle Armor Pack\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComplete protection for your Ford F100\/F150 rear axle with reinforced armor and covers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis armor pack is designed to give your Ford F100 or F150’s rear axle the extra strength it needs on and off the trail. By combining a truss, pinion guard, and a heavy-duty differential cover, it reinforces weak points and shields critical components like the diff and pinion from damage. Built from thick plate steel, fully welded, and ready to take abuse — this kit is a practical upgrade for anyone serious about reliability and longevity.\u003c\/p\u003e\n\u003cp\u003eEach differential cover is cut from 3\/8\" plate steel, bent in 8 places for rigidity, and fully welded inside and out. The machined-flat surface guarantees a perfect seal, and every cover is fully backed by a lifetime warranty. The pack includes all necessary hardware for installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2838\u003c\/li\u003e\n\u003cli\u003eFits Ford F100 \u0026amp; F150 rear axles\u003c\/li\u003e\n\u003cli\u003eFull armor solution — truss, pinion guard, and differential cover included\u003c\/li\u003e\n\u003cli\u003e3\/8\" plate steel construction for strength and durability\u003c\/li\u003e\n\u003cli\u003eCovers bent in 8 places and machined flat for perfect fit\u003c\/li\u003e\n\u003cli\u003eAll seams fully welded inside and out\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on differential covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1386?_pos=1\u0026amp;_psq=R1386\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eFord 9\" Factory Back Truss (R1386)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1270-kit-2?_pos=1\u0026amp;_psq=R1270\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eDana 44 Differential Cover (R1270)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.ruffstuffspecialties.com\/products\/r1139-kit-2?_pos=1\u0026amp;_psq=R1139\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eFord 9\" Factory Pinion Guard (R1139)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eDirect bolt-on installation. Lifetime warranty on all differential covers included in this pack. Verify clearance if you’re running custom suspension or axle modifications before welding in the truss.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363447976093,"sku":"PN2838-Kit-1","price":366.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2838-ford-f100-f150-rear-axle-armor-pack-ruffstuff-specialties-1.webp?v=1780418550"},{"product_id":"pn2542","title":"Tie Down Ratchet Strap Bracket - Weld On Axle","description":"\u003ch3\u003eTie Down Ratchet Strap Bracket - Weld On Axle\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eClean tie-down points for trailer loading.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis weld-on axle bracket eliminates the hassle of feeding ratchet straps through springs, brake lines, and other axle components when loading your vehicle on a trailer. No more cut straps from sharp edges or struggling to find secure attachment points. This bracket provides a dedicated, accessible tie-down point that keeps your straps safe and your loading process quick.\u003c\/p\u003e\n\u003cp\u003eCNC laser cut from 1\/4\" thick steel for maximum strength and durability. Designed to handle the forces of securing vehicles during transport while providing years of reliable service.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2542\u003c\/li\u003e\n\u003cli\u003eFitment: Universal axle mount\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4\" thick steel, CNC laser cut\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.75 lbs weight\u003c\/li\u003e\n\u003cli\u003eDesign: Weld-on installation, dedicated strap attachment point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Tie down ratchet strap bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWelding required for installation\u003c\/li\u003e\n\u003cli\u003eSold individually - order quantity needed for your setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363455217821,"sku":"PN2542","price":17.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2542-edit.jpg?v=1780418756"},{"product_id":"r2468-e","title":"Low Profile Overland Bed Bars - (No Tubing)","description":"\u003ch3\u003eLow Profile Overland Bed Bars - (No Tubing)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMounting brackets for building your own low-profile bed bar system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese bed bar brackets provide a simple, cost-effective way to mount a rooftop tent or other accessories. Made from 1\/4\" thick mild steel, the brackets are designed to work with most truck beds and allow you to supply your own tubing for a fully custom setup.\u003c\/p\u003e\n\u003cp\u003eThis version of the kit does not include tubing, giving you the freedom to use your own 1.5\" OD x .120 wall DOM tubing. If you'd prefer a complete kit with tubing included, check out our alternative option.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2468-E\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting rooftop tents and overland accessories\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4\" thick mild steel\u003c\/li\u003e\n\u003cli\u003eWorks with most truck beds\u003c\/li\u003e\n\u003cli\u003eDIY-friendly—supply your own 1.5\" OD x .120 wall DOM tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Tacoma 05+, Tundra 07+","offer_id":48363457446045,"sku":"PN2468-E-Kit-2","price":168.3,"currency_code":"USD","in_stock":false},{"title":"Universal","offer_id":48363457478813,"sku":"PN2468-E-Kit-1","price":168.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2468-B-cad-1600.jpg?v=1780418801"},{"product_id":"r2468-b","title":"Low Profile Overland Bed Bars - Universal","description":"\u003ch3\u003eLow Profile Overland Bed Bars - Universal\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, low-profile bed bars for rooftop tents and overland gear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bed bar kit is a cost-effective way to add strength and utility to your truck bed. Designed for rooftop tents, recovery gear, and other overland essentials, it provides a solid mounting system without unnecessary bulk.\u003c\/p\u003e\n\u003cp\u003eThe kit includes two 70\" DOM crossbars that are ready to cut to fit your bed. Brackets are made from 1\/4\" thick mild steel and designed for universal truck bed fitment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2468-B\u003c\/li\u003e\n\u003cli\u003eUniversal fit — works with most truck beds\u003c\/li\u003e\n\u003cli\u003eIncludes (2) 70\" long 1.5\" OD x .120\" wall DOM crossbars (cut to fit)\u003c\/li\u003e\n\u003cli\u003eMounting brackets made from 1\/4\" thick mild steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 70\" long 1.5\" x .120\" DOM tubes with end caps\u003c\/li\u003e\n\u003cli\u003e(4) Mounting brackets\u003c\/li\u003e\n\u003cli\u003e(8) 1\/2\"-13 grade 8 bolts\u003c\/li\u003e\n\u003cli\u003e(8) 1\/2\"-13 lock nuts\u003c\/li\u003e\n\u003cli\u003e(16) 1\/2\" hardened washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCrossbars ship at 70\" length and must be cut to fit your specific truck bed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363457577117,"sku":"PN2468-B-Kit-1","price":237.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2468-B-cad.jpg?v=1780418805"},{"product_id":"r2365","title":"Lube Locker Ford 9\" Differential Gasket","description":"\u003ch3\u003eFord 9\" Differential Gasket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReusable gasket for Ford 9\" third members—no RTV required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis gasket is designed for Ford 9\" third members and is built with a rubber-coated aluminum core that delivers a dependable seal. It eliminates the need for RTV, saving time and preventing messy cleanup. With proper care, these gaskets can be reused multiple times, making them both reliable and cost-effective.\u003c\/p\u003e\n\u003cp\u003eLube Locker gaskets are trusted by racers, off-roaders, and mechanics because they simplify service—no scraping, no RTV, and no wasted time. They’re the proven choice when you need a durable, reusable solution for your Ford 9\" differential.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2365\u003c\/li\u003e\n\u003cli\u003eFits Ford 9\" third members\u003c\/li\u003e\n\u003cli\u003eRubber-coated aluminum core for superior sealing\u003c\/li\u003e\n\u003cli\u003eReusable with proper care\u003c\/li\u003e\n\u003cli\u003eNo RTV or gasket scraping required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458592925,"sku":"PN2365","price":29.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2365-lube-locker-ford-9-inches-differential-gasket-image-1-ruffstuff-specialties.jpg?v=1780418853"},{"product_id":"r2360","title":"Lube Locker Ford 8.8\" Differential Gasket","description":"\u003ch3\u003eFord 8.8 Differential Cover Gasket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReusable gasket for Ford 8.8 axles—no RTV required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis gasket is designed for Ford 8.8 differential covers and is built with a rubber-coated aluminum core that delivers a strong, lasting seal. Unlike RTV, it eliminates messy cleanup and scraping, making maintenance faster and easier. With reasonable care, these gaskets can be reused multiple times, saving both time and cost.\u003c\/p\u003e\n\u003cp\u003eLube Locker gaskets are proven by racers, off-roaders, and mechanics as the better option over RTV or paper gaskets. They provide consistent sealing performance while simplifying service—making them the go-to choice for reliable differential maintenance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2360\u003c\/li\u003e\n\u003cli\u003eFits Ford 8.8 differential covers\u003c\/li\u003e\n\u003cli\u003eRubber-coated aluminum core for superior sealing\u003c\/li\u003e\n\u003cli\u003eReusable with proper care\u003c\/li\u003e\n\u003cli\u003eNo RTV or gasket scraping required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458658461,"sku":"PN2360","price":29.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2360-lube-locker-ford-8-point-8-inches-differential-gasket-image-1-ruffstuff-specialties.jpg?v=1780418857"},{"product_id":"r2198","title":"Spring Under U-Bolt Plate Pair","description":"\u003ch3\u003eSpring Under U-Bolt Plate Pair\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty plates for secure spring mounting.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese cradle-style u-bolt plates provide a solid foundation for your leaf spring setup while protecting u-bolt threads from dirt and rocks. The 1.75\" deep design creates a protective pocket that keeps your hardware clean and secure. Perfect for builds where you need reliable spring clamping with added protection from trail debris.\u003c\/p\u003e\n\u003cp\u003eDesigned for 2.5\" wide springs with a snug fit that prevents the spring from shifting even if the center pin is lost. Compatible with 2.75\" to 3.5\" axle tubes and requires finish welding of seams and strap plates for complete installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2198\u003c\/li\u003e\n\u003cli\u003eFitment: 2.75\" to 3.5\" axle tubes with 2.5\" springs\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel plate construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75\" deep cradle design, 2.5\" spring width\u003c\/li\u003e\n\u003cli\u003eSpecial design features: Thread protection and snug spring fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x U-bolt plates (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFinish welding required for seams and strap plates\u003c\/li\u003e\n\u003cli\u003e90 ft-lb maximum u-bolt torque specification\u003c\/li\u003e\n\u003cli\u003eU-bolts sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363462033565,"sku":"PN2198-Kit-1","price":78.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2198-full.jpg?v=1780418946"},{"product_id":"pn2114","title":"Ford Dana 60 67-76' Rear Axle Disc Brake Conversion Kit","description":"\u003ch4\u003eFord Dana 60 67-76' Rear Axle Disc Brake Conversion Kit\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eComplete disc brake conversion for 1967-1976 Ford Dana 60 full float rear axles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ford Dana 60 Disc Brake Conversion Kit replaces outdated drum brakes with modern disc brake performance. This complete kit includes everything needed to upgrade your 1967-1976 Ford Dana 60 full float rear axle to reliable disc brakes. The conversion improves stopping power, reduces unsprung weight, and eliminates common drum brake issues like fade and adjustment problems. Perfect for classic Ford trucks and Broncos running the full float Dana 60 rear end.\u003c\/p\u003e\n\u003cp\u003eThis kit features heavy-duty caliper brackets designed specifically for the Ford Dana 60 full float housing. The included rotors are precision-machined for smooth, consistent braking, and the calipers provide excellent stopping power for heavy vehicles and off-road use. All mounting hardware and brake pads are included for a complete bolt-on installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2114\u003c\/li\u003e\n\u003cli\u003eFitment: 1967-1976 Ford Dana 60 full float rear axle\u003c\/li\u003e\n\u003cli\u003eComplete bolt-on disc brake conversion kit\u003c\/li\u003e\n\u003cli\u003eHeavy-duty caliper mounting brackets\u003c\/li\u003e\n\u003cli\u003ePrecision-machined rotors for smooth braking\u003c\/li\u003e\n\u003cli\u003eHigh-performance brake calipers and pads included\u003c\/li\u003e\n\u003cli\u003eReduces weight compared to drum brakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo caliper mounting brackets (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eTwo brake calipers\u003c\/li\u003e\n\u003cli\u003eTwo brake rotors\u003c\/li\u003e\n\u003cli\u003eBrake pads\u003c\/li\u003e\n\u003cli\u003eMounting bolts, washers, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for full float Dana 60 rear axles only - verify your axle type before ordering\u003c\/li\u003e\n\u003cli\u003eBrake lines and proportioning valve may need modification for proper operation\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper brake system setup and bleeding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Yes \/ Yes","offer_id":48363463213213,"sku":"PN2114-Kit-3","price":715.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ No","offer_id":48363463245981,"sku":"PN2114-Kit-4","price":671.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes","offer_id":48363463278749,"sku":"PN2114-Kit-1","price":528.0,"currency_code":"USD","in_stock":true},{"title":"No \/ No","offer_id":48363463311517,"sku":"PN2114-Kit-2","price":484.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2114-ford-dana-60-67-76-rear-axle-disc-brake-conversion-kit-image-1-ruffstuff-specialties.webp?v=1780418991"},{"product_id":"r2101","title":"Ford 9\" Third Member Housing Stud","description":"\u003ch3\u003eFord 9\" Third Member Housing Stud\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement stud for securing the third member to your fabricated 9\" housing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 3\/8\"-24 thread stud is a direct fit for fabricated Ford 9\" axle housings. It's built to hold the third member securely in place under load, keeping everything torqued down where it should be. Whether you're swapping center sections or replacing worn hardware, this stud helps ensure a solid, leak-free seal every time.\u003c\/p\u003e\n\u003cp\u003eSold individually, these are ideal as replacements or spares to keep on hand in the toolbox. Clean threads and a consistent fit make installation straightforward, whether you're doing a full teardown or quick swap.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2101\u003c\/li\u003e\n\u003cli\u003eFits Fabricated Ford 9\" axle housings\u003c\/li\u003e\n\u003cli\u003e3\/8\"-24 TPI thread pitch\u003c\/li\u003e\n\u003cli\u003eSecures third member to housing\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363463901341,"sku":"PN2101","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2101-ford-9-inch-third-member-housing-stud-ruffstuff-specialties-1.webp?v=1780419003"},{"product_id":"pn2054","title":"Ford Dana 60 67-79 Newer Rear Axle Disc Brake Conversion Kit","description":"\u003ch4\u003eFord Dana 60 67-79 Newer Rear Axle Disc Brake Conversion Kit\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eComplete disc brake conversion for 1967-1979 Ford Dana 60 rear axles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis disc brake conversion kit gives you everything needed to upgrade your Ford Dana 60 rear axle from drums to modern disc brakes. Designed specifically for 1967-1979 newer-style Ford Dana 60 rear axles, this kit provides reliable stopping power for F-250, F-350, and custom builds where drum brakes just don't cut it anymore. The bolt-on design makes installation straightforward while delivering the performance and safety benefits of disc brakes.\u003c\/p\u003e\n\u003cp\u003eEach kit includes precision-cut brackets, complete brake hardware, and all the components needed for a professional installation. The brackets are designed to work with common brake calipers and rotors, giving you flexibility in your brake setup while maintaining proper geometry and clearance. Perfect for trucks that see heavy towing, off-road use, or anyone looking to modernize their braking system.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2054\u003c\/li\u003e\n\u003cli\u003eFitment: Ford Dana 60 rear axles, 1967-1979 newer style\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel brackets\u003c\/li\u003e\n\u003cli\u003eWeight: 83 lbs complete kit\u003c\/li\u003e\n\u003cli\u003eDesign: Bolt-on installation for secure mounting\u003c\/li\u003e\n\u003cli\u003eComplete hardware kit with brackets, bolts, washers, and 5\/8 nut 18TPI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDisc brake brackets (pair)\u003c\/li\u003e\n\u003cli\u003eMounting bolts\u003c\/li\u003e\n\u003cli\u003eWashers\u003c\/li\u003e\n\u003cli\u003e5\/8 nut 18TPI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 1967-1979 Ford Dana 60 rear axles (newer style)\u003c\/li\u003e\n\u003cli\u003eCalipers and rotors sold separately\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli\u003eVerify axle year and style before ordering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Yes \/ Yes","offer_id":48363466948765,"sku":"PN2054-Kit-3","price":715.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ No","offer_id":48363466981533,"sku":"PN2054-Kit-4","price":671.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes","offer_id":48363467014301,"sku":"PN2054-Kit-1","price":528.0,"currency_code":"USD","in_stock":true},{"title":"No \/ No","offer_id":48363467047069,"sku":"PN2054-Kit-2","price":484.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2054-ford-dana-60-77-84-newer-rear-axle-disc-brake-conversion-kit-ruffstuff-specialties-1_8793d719-a18c-4a9c-ac52-c4894166e79b.webp?v=1780419019"},{"product_id":"r2052","title":"Dana 70 Ford Axle Disc Brake Conversion Kit","description":"\u003ch3\u003eDana 70 Ford Axle Disc Brake Conversion Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFord Dana 70 \u0026amp; 70U SRW Disc Brake Swap\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis disc brake kit is built for converting Ford Dana 70 and Dana 70U single rear wheel (SRW) axles from drums to discs. It's designed specifically for these axles, so there's no need for grinding or guesswork during installation.\u003c\/p\u003e\n\u003cp\u003eThe kit includes everything needed—brackets, calipers, rotors, pads, hoses, and hardware. It's a solid upgrade if you're looking for better braking performance, easier serviceability, and a lighter setup compared to factory drums.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2052\u003c\/li\u003e\n\u003cli\u003eFits Ford Dana 70 and Dana 70U SRW rear axles\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware, calipers, rotors, pads, lines, and brackets\u003c\/li\u003e\n\u003cli\u003eNot for dual rear wheel (DRW) or van axles\u003c\/li\u003e\n\u003cli\u003eWorks with 15\"+ steel wheels with max 4\" backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pair Dana 70 Ford Disc Brake Brackets (R1115-01 Passenger, R1115-02 Driver)\u003c\/li\u003e\n\u003cli\u003e(2) Weld-On Brake Line Tabs\u003c\/li\u003e\n\u003cli\u003e(2) Brake Line Clips\u003c\/li\u003e\n\u003cli\u003e(2) Brake Calipers\u003c\/li\u003e\n\u003cli\u003e(4) New Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) New Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Hydraulic Hoses with Banjo Bolt Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eImportant Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRotor installs behind the hub\u003c\/li\u003e\n\u003cli\u003eMay require hub machining (~3\/16\") for rotor fitment\u003c\/li\u003e\n\u003cli\u003eStuds must drop freely into rotors—do not press fit\u003c\/li\u003e\n\u003cli\u003eEnsure minimum 5\/8\" lug nut thread engagement\u003c\/li\u003e\n\u003cli\u003eResidual valve must be removed to prevent rear brake drag\u003c\/li\u003e\n\u003cli\u003eAdjustable proportioning valve recommended for proper brake bias\u003c\/li\u003e\n\u003cli\u003eBracket bend faces toward the differential\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrade to Parking Brake Calipers: Yes \/ No\u003c\/li\u003e\n\u003cli\u003eUpgrade to Steel Braided Brake Hose: Yes \/ No\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"No \/ Yes","offer_id":48363467210909,"sku":"PN2052-Kit-1","price":528.0,"currency_code":"USD","in_stock":true},{"title":"No \/ No","offer_id":48363467243677,"sku":"PN2052-Kit-2","price":484.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Yes","offer_id":48363467276445,"sku":"PN2052-Kit-3","price":715.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ No","offer_id":48363467309213,"sku":"PN2052-Kit-4","price":671.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2052-dana-70-ford-axle-disc-brake-conversion-kit-image-1-ruffstuff-specialties.webp?v=1780419025"},{"product_id":"r1943","title":"Ford Small Block Motor Mounts (289, 302, 351W, 351C)","description":"\u003ch3\u003eFord Small Block Motor Mounts\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBuild-your-way motor mounts for Ford small blocks — ready to fit your exact setup.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese small block motor mounts come unwelded so you can fine-tune the placement of the bushing mount on the base plate. Whether you need to offset left or right, you’ve got the flexibility to get it right for your chassis and drivetrain combo. Once you’re happy with the placement, just weld them in and you’re set with a strong, custom-fit solution.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit a wide range of Ford small block engines, these mounts are a straightforward way to lock in reliability without being stuck to one fixed position. Perfect for custom builds where clearance and alignment matter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1943\u003c\/li\u003e\n\u003cli\u003eUnwelded design allows offset adjustment before final fitment\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction\u003c\/li\u003e\n\u003cli\u003eDIY-friendly — weld once positioned for your setup\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of Ford small block motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eFits Ford small block engines: 289, 302, 351 Cleveland, and 351 Windsor. Welding required for installation. Test-fit before final weld to ensure proper alignment.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363471110301,"sku":"PN1943-Kit-1","price":130.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1943-ford-small-block-motor-mounts-289-302-351w-351c-image-1-ruffstuff-specialties.webp?v=1780419079"},{"product_id":"pn1668","title":"Ford 9\" Axle Housing","description":"\u003ch3\u003eFord 9\" Axle Housing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFabricated 9\" housing, 72\" long with 3.5\" × 3\/8\" DOM tubes and reinforced center\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis USA-built housing uses a 3\/8\" face plate that's drilled and machined flat after welding for precise third-member fit. The shell is 1\/4\" steel with 12 bends and added 3\/16\" armor in high-impact areas, plus 1\/4\" internal gusseting for rigidity. It accepts Ford 9\" third members and allows 9\" or 10\" ring gear setups for high strength builds.\u003c\/p\u003e\n\u003cp\u003eAxle tubes are raw 3.5\" OD × 0.375\" wall DOM (2.75\" ID) keyed into the face plate and fully gusseted—cut to your width during setup. A weld-in 3\/4\" NPT fill\/drain bung is included; installation requires cutting\/welding, and the breather vent requires drilling and tapping (5\/16\"-18). Center section armor, studs, inner seal surface, and seal set screws are included to simplify final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This is a build-to-order product. Please allow a 4-6 week lead time for production.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1668\u003c\/li\u003e\n\u003cli\u003eOverall housing length: 72\"\u003c\/li\u003e\n\u003cli\u003e3\/8\" face plate, machined after welding\u003c\/li\u003e\n\u003cli\u003e1\/4\" shell with 12 bends + 3\/16\" armor\u003c\/li\u003e\n\u003cli\u003e1\/4\" internal gusseting ties center together\u003c\/li\u003e\n\u003cli\u003eAccepts 9\" or 10\" ring gear third members\u003c\/li\u003e\n\u003cli\u003e3.5\" OD × 3\/8\" wall DOM tubes (2.75\" ID)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFace plate: 3\/8\" steel, machined post-weld\u003c\/li\u003e\n\u003cli\u003eMain shell: 1\/4\" steel with additional 3\/16\" armor\u003c\/li\u003e\n\u003cli\u003eStuds: 3\/8\"-24 TPI\u003c\/li\u003e\n\u003cli\u003eFill plug (standard): 3\/4\" NPT with weld-in bung\u003c\/li\u003e\n\u003cli\u003eBreather vent: drill\/tap 5\/16\"-18; brass barb included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFord 9\" bare tube housing\u003c\/li\u003e\n\u003cli\u003eCenter section armor installed\u003c\/li\u003e\n\u003cli\u003eCenter section studs\u003c\/li\u003e\n\u003cli\u003eFill plug and weld-in bung (cutting\/welding required) - choose standard 3\/4\" NPT or oversized 1.5\"- 6 UNC inspection plug\u003c\/li\u003e\n\u003cli\u003eInner seal surface and seal set screws\u003c\/li\u003e\n\u003cli\u003eBrass thread-in breather barb fitting (drilling\/tapping required)\u003c\/li\u003e\n\u003cli\u003eOptional truss reinforcement - available in top, back, or top + back configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cdiv class=\"product-info__block product-backorder\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eHousing ships long at 72\" and requires cutting\/fixturing to your width; mock up axle ends, brackets, and pinion angle before welding. Install the 3\/4\" NPT bung by cutting and welding, and drill\/tap the breather to 5\/16\"-18 as needed; verify third-member fit on the machined face before final assembly. Use proper fixturing to keep tubes straight, then complete all welds and recheck runout and stud torque prior to service.\u003c\/p\u003e\n\u003cdiv class=\"product-info__block product-options\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-info__block product-backorder\"\u003e\n\u003cdiv class=\"backorder\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Oversized 1.5\"- 6 UNC Inspection Plug \/ No Truss","offer_id":48363476189341,"sku":"PN1668-Kit-2","price":1428.9,"currency_code":"USD","in_stock":true},{"title":"Oversized 1.5\"- 6 UNC Inspection Plug \/ Top + Back Truss","offer_id":48363476222109,"sku":"PN1668-Kit-4","price":2178.9,"currency_code":"USD","in_stock":false},{"title":"Oversized 1.5\"- 6 UNC Inspection Plug \/ Top Truss","offer_id":48363476254877,"sku":"PN1668-Kit-6","price":1803.9,"currency_code":"USD","in_stock":false},{"title":"Oversized 1.5\"- 6 UNC Inspection Plug \/ Back Truss","offer_id":48363476287645,"sku":"PN1668-Kit-8","price":1803.9,"currency_code":"USD","in_stock":false},{"title":"Standard 3\/4\" NPT Fill Plug w\/ Weld In Bung \/ No Truss","offer_id":48363476320413,"sku":"PN1668-Kit-1","price":1373.9,"currency_code":"USD","in_stock":false},{"title":"Standard 3\/4\" NPT Fill Plug w\/ Weld In Bung \/ Top + Back Truss","offer_id":48363476353181,"sku":"PN1668-Kit-3","price":2123.9,"currency_code":"USD","in_stock":false},{"title":"Standard 3\/4\" NPT Fill Plug w\/ Weld In Bung \/ Top Truss","offer_id":48363476385949,"sku":"PN1668-Kit-5","price":1748.9,"currency_code":"USD","in_stock":false},{"title":"Standard 3\/4\" NPT Fill Plug w\/ Weld In Bung \/ Back Truss","offer_id":48363476418717,"sku":"PN1668-Kit-7","price":1748.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1273_toyota_9_5_land_cruiser_axle_housing_main.jpg?v=1783007959"},{"product_id":"pn1458","title":"Ford 9\" Axle Shaft Gauge","description":"\u003ch3\u003eFord 9\" Axle Shaft Gauge\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQuickly visualize axle shaft placement and pinion alignment on your Ford 9\" housing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bolt-on gauge gives you a fast and reliable way to see exactly where your axle shafts will land in relation to the pinion centerline. The machined slit marks the pinion center, while the rectangular cutout indicates the natural gap between the shafts. Whether you're building a custom-width housing or double-checking stock dimensions, this tool saves time and prevents guesswork.\u003c\/p\u003e\n\u003cp\u003eThe gauge helps confirm you're getting enough spline engagement — you generally only need about 75%. You can measure right up to the edge of the box and subtract roughly 1\/8\" for a safe and accurate reading. It’s a straightforward tool that can make a big difference when you’re cutting or ordering shafts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1458\u003c\/li\u003e\n\u003cli\u003eBolts directly to Ford 9\" axle housings\u003c\/li\u003e\n\u003cli\u003eSlit marks pinion centerline for precise reference\u003c\/li\u003e\n\u003cli\u003eCutout box shows axle shaft gap zone\u003c\/li\u003e\n\u003cli\u003eUseful for shaft length planning and housing setup\u003c\/li\u003e\n\u003cli\u003eSpeeds up custom builds and reduces rework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eYou typically only need 75% spline engagement. Measure to the edge of the box and subtract about 1\/8\" for best results.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363481956509,"sku":"PN1458","price":23.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1458-ford-9-inch-axle-shaft-gauge-ruffstuff-specialties-1.webp?v=1780419306"},{"product_id":"r1386","title":"Ford 9\" Factory Back Truss","description":"\u003ch3\u003eFord 9\" Factory Back Truss\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFactory 9\" housing? This brings our crowned truss strength to the stock game.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur well-known crown-shaped truss design isn’t just for custom housings anymore — this kit adapts it for factory Ford 9\" housings without compromising strength or weight. Instead of the typical flat-back profile, this truss uses four strategic bends to drastically increase rigidity across the rear. It’s long enough to reach the brake brackets, eliminating the usual weak spots where other trusses fall short. Built from .135\" steel, it strikes a balance between durability and weight savings — thicker than 1\/8\" but not overkill.\u003c\/p\u003e\n\u003cp\u003eWhat really sets this design apart is the way it mounts. Instead of focusing heat on one side of the tube, the truss runs the full width of the axle, allowing welds 180 degrees apart. That means far less risk of axle warp during installation. It’s a practical, purpose-built approach made for guys who care about keeping things true and tight the first time around.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1386\u003c\/li\u003e\n\u003cli\u003eDesigned for factory Ford 9\" axle housings\u003c\/li\u003e\n\u003cli\u003eCrown shape adds significant rigidity vs flat-back trusses\u003c\/li\u003e\n\u003cli\u003eConstructed from .135\" steel for optimal strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eFull-length design reaches brake brackets to avoid weak points\u003c\/li\u003e\n\u003cli\u003eWide-mount truss reduces axle warping by balancing weld heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eDue to factory Ford 9\" housing variations, some trimming or shortening of the truss may be required during installation.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363483988125,"sku":"PN1386-Kit-1","price":167.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1386-ford-9-inch-factory-back-truss-ruffstuff-specialties-1.webp?v=1780419365"},{"product_id":"pn1328","title":"Ford 8.8 \/ Dana 60 \/ Ford 9\" Spring Perch Pair","description":"\u003ch3\u003eFord 8.8 \/ Dana 60 \/ Ford 9\" Spring Perches\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e7.75\" long × 2.5\" wide weld-on perches with 3 spring pin positions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese perches are CNC laser cut from .25\" HR P\u0026amp;O steel and brake-formed for consistent fit. The 7.75\" length helps control axle wrap, and the 2.5\" width provides a stable spring platform. Three spring pin holes allow small wheelbase adjustments without re-drilling your springs.\u003c\/p\u003e\n\u003cp\u003ePerches are profiled for 3.25\" axle tubes and include three 1\/16\" nubs so they also seat a 3.125\" (small Ford 9\") tube out of the box. Grind off the nubs to fit Ford 8.8, Dana 60, or Ford 9\" (3.25\") housings; these are for spring-over applications only and are sold in pairs. Set pinion angle and perch orientation during mock-up, then weld fully for permanent installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1328\u003c\/li\u003e\n\u003cli\u003eMaterial: .25\" (1\/4) HR P\u0026amp;O steel, CNC laser cut and formed\u003c\/li\u003e\n\u003cli\u003eLength: 7.75\"; Width: 2.5\"\u003c\/li\u003e\n\u003cli\u003eAxle tube fit: 3.25\" (with removable 1\/16\" nubs for 3.125\")\u003c\/li\u003e\n\u003cli\u003eThree spring pin locations for wheelbase adjustment\u003c\/li\u003e\n\u003cli\u003eSpring-over application\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Spring perches for one axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eVerify axle diameter before welding; leave nubs in place for 3.125\" tubes and remove them for 3.25\" tubes (Ford 8.8, Dana 60, Ford 9\"). These are for spring-over installs only—set pinion angle, center pin location, and perch clocking during mock-up. Tack, cycle suspension, then weld fully and torque U-bolts per spec.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363488477341,"sku":"PN1328-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1328-ford-8-8-dana-60-ford-9-inch-spring-perch-pair-ruffstuff-specialties-1.webp?v=1780419430"},{"product_id":"r1182","title":"Spring Under Axle Perches for 3\", 3.25,\" 3.5\" Axle Tubes","description":"\u003ch3\u003eSpring Under Axle Perches for 3\", 3.25,\" 3.5\" Axle Tubes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty perches built for extreme flex.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese fully-boxed spring perches are engineered specifically for spring-under-axle applications where maximum flex is critical. Born from desert racing needs, they're built strong enough to handle extreme suspension travel while staying compact at just 4 3\/4\" long to avoid limiting flex. Perfect for high-performance builds where you need bulletproof mounting without compromising suspension movement.\u003c\/p\u003e\n\u003cp\u003eConstructed from 3\/16\" steel in a fully-boxed design for maximum strength-to-weight ratio. Available for 3\", 3.25\", or 3.5\" axle tubes with 2.5\" spring width. CNC precision ensures perfect fitment every time.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1182\u003c\/li\u003e\n\u003cli\u003eFitment: 3\", 3.25\", or 3.5\" axle tubes\u003c\/li\u003e\n\u003cli\u003eMaterial: 3\/16\" steel, fully-boxed construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 4 3\/4\" length, 2.5\" width, multiple tube diameters\u003c\/li\u003e\n\u003cli\u003eSpecial design features: Compact design for maximum flex clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x Spring perches (pair for one axle)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor spring-under-axle applications, also works for extreme travel SOA builds\u003c\/li\u003e\n\u003cli\u003eWelding required for installation to axle tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"3\" Axle Tube","offer_id":48363497390237,"sku":"PN1182-Kit-1","price":51.7,"currency_code":"USD","in_stock":true},{"title":"3.25\" Axle Tube","offer_id":48363497423005,"sku":"PN1182-Kit-2","price":51.7,"currency_code":"USD","in_stock":true},{"title":"3.5\" Axle Tube","offer_id":48363497455773,"sku":"PN1182-Kit-3","price":51.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1182-full.jpg?v=1780419557"},{"product_id":"r1147","title":"Ford\/Chevy\/Dodge U-Bolt Plates (3\" Springs)","description":"\u003ch3\u003eFord\/Chevy\/Dodge U-Bolt Plates for 3\" Springs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty U-bolt plates for full-size leaf springs and multiple axle sizes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese U-bolt plates are designed with standard 3\" wide full-size Ford, Chevy, and Dodge leaf springs in mind, but they'll easily accommodate anything from 2.75\" to 3\" wide. Whether you're doing a spring-over or spring-under setup, these plates offer solid strength and fitment flexibility for a wide range of builds.\u003c\/p\u003e\n\u003cp\u003eEach plate is cut from 3\/8\" hot-rolled P\u0026amp;O steel and includes 3 center pin positions, letting you dial in your wheelbase without redrilling. They'll fit axle tubes from 2.5\" up to 4.125\" in diameter, and accept 9\/16\" to 5\/8\" U-bolts — though we always recommend going with 5\/8\" for the added strength. These are made to handle trail abuse, not just look good in a parts bin.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1147\u003c\/li\u003e\n\u003cli\u003eFits spring widths from 2.75\" to 3.0\"\u003c\/li\u003e\n\u003cli\u003eAxle tube fitment: 2.5\" to 4.125\" diameter\u003c\/li\u003e\n\u003cli\u003e3\/8\" HR P\u0026amp;O steel plate, CNC laser cut\u003c\/li\u003e\n\u003cli\u003e3 spring pin mounting positions for wheelbase adjustment\u003c\/li\u003e\n\u003cli\u003eCompatible with 9\/16\" to 5\/8\" U-bolts (5\/8\" recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) U-bolt plates\u003c\/li\u003e\n\u003cli\u003eSold in pairs — one axle set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eThese plates are designed for use with full-size 3\" leaf springs and can be used in spring-over or spring-under applications. They are a weld-free, bolt-on solution when used with appropriate U-bolts (not included).\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499683997,"sku":"PN1147-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1147-ford-chevy-dodge-u-bolt-plates-3-inch-springs-ruffstuff-specialties-1.webp?v=1780419608"},{"product_id":"r1143","title":"Ford Dana 60 Front Axle Simple Swap Kit (late model, 78-97)","description":"\u003ch3\u003eFord Dana 60 Front Axle Simple Swap Kit (Late Model, ’78–’97)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEverything you need to cleanly hang a late-model Ford Dana 60 up front—without the scavenger hunt.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’ve had a pile of calls for this combo, so here it is. Built in the same spirit as our Rear Axle Simple Swaps, this front kit pares it down to exactly what a late-model (1978–1997) Ford Dana 60 needs. You only require one spring perch on this housing, so we include one. The cast side gets handled with the right plate pattern, and we include plates set up for 2.5\" springs out of the box—if your build needs a different plate width, tell us and we’ll set it up before it leaves the shop.\u003c\/p\u003e\n\u003cp\u003eU-bolts are the usual hang-up on these axles, so we sized the spread correctly: three at 3.25\" and one at 4.125\". If you’ve got one of the heavier variants with 3.5\" tubes, we can swap the U-bolts to match. Curved shock brackets are included so the shocks ride up the C smoothly instead of fighting it. It’s a straightforward, weld-in solution for the DIY garage builder who’d rather be turning wrenches than chasing parts.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1143\u003c\/li\u003e\n\u003cli\u003eDesigned for late-model Ford Dana 60 front axles (1978–1997)\u003c\/li\u003e\n\u003cli\u003eOne-perch setup tailored to this housing\u003c\/li\u003e\n\u003cli\u003eCurved shock brackets improve clearance and shock angle on the C\u003c\/li\u003e\n\u003cli\u003eU-bolt mix matched to tube and cast side; 3.5\" tube option available on request\u003c\/li\u003e\n\u003cli\u003ePlates set up for 2.5\" springs; alternate widths available by request\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 Leaf Spring Plates for 2.5\" springs\u003c\/li\u003e\n\u003cli\u003e1 Spring Perch — 3.25\" axle diameter, 2.5\" wide\u003c\/li\u003e\n\u003cli\u003e2 Curved Shock Brackets (1.5\" ID)\u003c\/li\u003e\n\u003cli\u003e3 U-bolts: 10\" × 5\/8\" × 3.25\" with hardware\u003c\/li\u003e\n\u003cli\u003e1 U-bolt: 10\" × 5\/8\" × 4.125\" with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. This kit does \u003cem\u003enot\u003c\/em\u003e fit the Super Duty Dana 60. If you’re working with a 3.5\" tube variant or a different spring width, let us know and we’ll swap the plates\/U-bolts to match before shipping.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"3 1\/4\"","offer_id":48363499782301,"sku":"PN1143-Kit-1","price":140.25,"currency_code":"USD","in_stock":true},{"title":"3 1\/2\"","offer_id":48363499815069,"sku":"PN1143-Kit-2","price":140.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1143-ford-dana-60-front-axle-simple-swap-kit-late-model-78-97-image-1-ruffstuff-specialties.webp?v=1780419612"},{"product_id":"r1142","title":"Ford Dana 60 Front Axle Simple Swap Kit ('77 \u0026 older)","description":"\u003ch3\u003eFord Dana 60 Front Axle Simple Swap Kit ('77 \u0026amp; Older)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSimplify your front Dana 60 axle swap with the right parts, right out of the box.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis front axle swap kit is built specifically for Ford Dana 60 axles found in 1977 and older trucks. Just like our Rear Axle Simple Swap Kits, it’s all about giving you exactly what you need — no extra fluff, no guesswork. There are a few key differences for the front: you’ll need three U-bolts of one size and a fourth that’s a bit wider (4 1\/8\"). The factory cast-in perch has its own bolt pattern, so we include a matching U-bolt plate for that side, and a standard one for the tube side. You’ll also get a single spring perch since only one is needed. For better ride quality and clearance, we throw in our curved shock brackets so you can ride up the C more easily.\u003c\/p\u003e\n\u003cp\u003eIf you’re running the wider 3\" Ford springs, no problem — just give us a call and we’ll swap out the perch and plates to match. This is a straightforward, trail-tested solution for anyone doing a front swap in their garage, without the hassle of piecing it together themselves.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1142\u003c\/li\u003e\n\u003cli\u003eFits Ford Dana 60 front axles from 1977 \u0026amp; older trucks\u003c\/li\u003e\n\u003cli\u003eBuilt for DIY swaps — minimal guesswork required\u003c\/li\u003e\n\u003cli\u003eCurved shock brackets help you ride up the C smoothly\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\" Ford springs (swap upon request)\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 leaf spring plates for 2.5\" springs\u003c\/li\u003e\n\u003cli\u003e1 spring perch for 3 1\/4\" axle and 2.5\" wide spring\u003c\/li\u003e\n\u003cli\u003e2 curved shock brackets (1.5\" ID)\u003c\/li\u003e\n\u003cli\u003e3 U-bolts: 10\" x 5\/8\" x 3 1\/4\" with hardware\u003c\/li\u003e\n\u003cli\u003e1 U-bolt: 10\" x 5\/8\" x 4 1\/8\" with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. You may also want to grab a Dana 60 differential cover and a pair of 1\/2\" x 3\" shock bracket bolts during installation. These are often overlooked but make a big difference in a solid, long-lasting setup.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499847837,"sku":"PN1142-Kit-1","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1142-ford-dana-60-front-axle-simple-swap-kit-77-and-older-ruffstuff-specialties-1.webp?v=1780419614"},{"product_id":"r1141","title":"Ford 9\" Simple Swap Kit (Big tube 9\", 3\" Springs)","description":"\u003ch4\u003eFord 9\" Simple Swap Kit (Big Tube 9\", 3\" Springs)\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eComplete axle swap kit for big tube Ford 9\" axles with 3\" wide springs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis simple swap kit gives you everything needed to install a big tube Ford 9\" rear axle under your truck or custom build. Designed for axles with 3\" wide leaf springs, this kit makes the swap straightforward by providing all the mounting hardware and spring perches in one package. Perfect for Ford Rangers, F-150s, and custom builds where you want the strength and gear ratio options of a Ford 9\" rear end.\u003c\/p\u003e\n\u003cp\u003eThe kit includes heavy-duty spring perches, U-bolts, and all necessary hardware to securely mount your axle. Big tube Ford 9\" axles are known for their strength and wide availability of gear ratios, making them a popular choice for street rods, off-road rigs, and performance builds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1141\u003c\/li\u003e\n\u003cli\u003eFitment: Big tube Ford 9\" rear axles with 3\" wide springs\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel components\u003c\/li\u003e\n\u003cli\u003eWeight: 24 lbs complete kit\u003c\/li\u003e\n\u003cli\u003eDesign: Bolt-on installation with U-bolts and spring perches\u003c\/li\u003e\n\u003cli\u003eComplete hardware kit with U-bolts, spring perches, washers, and 5\/8 nut 18TPI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpring perches (pair)\u003c\/li\u003e\n\u003cli\u003eU-bolts\u003c\/li\u003e\n\u003cli\u003eWashers\u003c\/li\u003e\n\u003cli\u003e5\/8 nut 18TPI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for big tube Ford 9\" axles with 3\" wide leaf springs\u003c\/li\u003e\n\u003cli\u003eVerify spring width and axle tube diameter before ordering\u003c\/li\u003e\n\u003cli\u003eMay require welding for spring perch installation depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"10\" Long","offer_id":48363499880605,"sku":"PN1141-Kit-1","price":135.91,"currency_code":"USD","in_stock":true},{"title":"13\" Long","offer_id":48363499913373,"sku":"PN1141-Kit-2","price":135.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1141-ford-9-inch-simple-swap-kit-big-tube-9-3-inch-springs-ruffstuff-specialties-1.webp?v=1780419616"},{"product_id":"pn1135","title":"Ford, Chevy, \u0026 Dodge 3\" Wide Spring Perch","description":"\u003ch3\u003eFord, Chevy \u0026amp; Dodge 3\" Wide Spring Perch (Pair)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty 3\" perches built for strength, adjustability, and stability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is one of those parts that seems simple—until you’re breaking welds or chasing axle wrap on a rig that sees real trail time. These 3\" wide perches are built from 1\/4\" hot-rolled P\u0026amp;O steel, laser-cut and brake-formed with precision. They’re designed to handle the abuse of big tires and heavy throttle, giving you a stable spring platform and enough length (8\") to actually help control axle wrap.\u003c\/p\u003e\n\u003cp\u003eEach perch is slotted for 3 spring pin positions, giving you up to 1.5\" of wheelbase adjustability without redrilling or making a mess of your setup. They’re built to fit a 3\" axle tube, commonly found on Ford 9\", but with a little grinder work they’ll fit tubes ±1\/4\" in size. Whether you're working on a classic Chevy, a Dodge swap, or a Ford trail rig, this kit keeps things simple, strong, and easy to dial in.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1135\u003c\/li\u003e\n\u003cli\u003eFits 3.0\" axle tubes (±1\/4\" with minor grinding)\u003c\/li\u003e\n\u003cli\u003e3\" wide perch for stable spring seating\u003c\/li\u003e\n\u003cli\u003e1\/4\" HR P\u0026amp;O steel plate, CNC laser cut\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 spring pin mounting positions for wheelbase adjustability\u003c\/li\u003e\n\u003cli\u003e8\" perch length to help reduce axle wrap\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 3\" wide spring perches\u003c\/li\u003e\n\u003cli\u003eSold in pairs — one axle set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. These are designed specifically for spring-over-axle setups and must be welded to your axle tubes. They are sold in pairs and fit 3.0\" diameter tubes, with minor grinding allowing fitment on tubes up to ±1\/4\".\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499978909,"sku":"PN1135-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1135-ford-chevy-dodge-3-inch-wide-spring-perch-ruffstuff-specialties-1.webp?v=1780419619"},{"product_id":"pn1119","title":"Deaver Long Travel Spring Under WIY Kit 2.5\" Springs","description":"\u003ch3\u003eDeaver Long Travel Spring Under WIY Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003ePartial DIY Kit for 2.5\" Springs — Spring Under Setup\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis weld-it-yourself kit is built for spring-under setups using 2.5\" wide Deaver long travel leaf springs. It includes deep cradle-style bottom plates to protect U-bolt threads from rocks and trail damage, with extra length for trimming after installation.\u003c\/p\u003e\n\u003cp\u003eThe snug spring plates are designed to hold everything in place even if the center pin fails. Perches are slightly wider than standard for full spring support and better axle control. This is a partial DIY kit—welding is required and it covers one axle (driver and passenger sides).\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1119\u003c\/li\u003e\n\u003cli\u003eWeld-it-yourself kit for 2.5\" wide long travel leaf springs\u003c\/li\u003e\n\u003cli\u003eCradle-style brackets offer U-bolt thread protection\u003c\/li\u003e\n\u003cli\u003ePerches available for 3\", 3.25\", or 3.5\" axle tube diameters\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent spring movement even without center pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Spring Under Leaf Spring Plates for 2.5\" Springs\u003c\/li\u003e\n\u003cli\u003e(2) Perches for 3\", 3.25\", or 3.5\" Axle Tubes (2.5\" Wide)\u003c\/li\u003e\n\u003cli\u003e(4) 8\" Long U-Bolts with Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable Kit Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAxle Tube Size: 3\" Axle Tube \/ 3.25\" Axle Tube \/ 3.5\" Axle Tube\u003c\/li\u003e\n\u003cli\u003eAdd 3\" Axle Mount Shock Bracket: No \/ Yes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"3\" Axle Tube \/ NO","offer_id":48363500634269,"sku":"PN1119-Kit-1","price":162.8,"currency_code":"USD","in_stock":true},{"title":"3\" Axle Tube \/ Yes","offer_id":48363500667037,"sku":"PN1119-Kit-2","price":180.4,"currency_code":"USD","in_stock":true},{"title":"3.25\" Axle Tube \/ NO","offer_id":48363500699805,"sku":"PN1119-Kit-3","price":162.8,"currency_code":"USD","in_stock":true},{"title":"3.25\" Axle Tube \/ Yes","offer_id":48363500732573,"sku":"PN1119-Kit-4","price":180.4,"currency_code":"USD","in_stock":true},{"title":"3.5\" Axle Tube \/ NO","offer_id":48363500765341,"sku":"PN1119-Kit-5","price":162.8,"currency_code":"USD","in_stock":true},{"title":"3.5\" Axle Tube \/ Yes","offer_id":48363500798109,"sku":"PN1119-Kit-6","price":180.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1119-deaver-long-travel-spring-under-wiy-kit-2-5-inch-springs-ruffstuff-specialties-1.webp?v=1780419635"}],"url":"https:\/\/rileymountainmotorsports.com\/collections\/f-150.oembed","provider":"Riley mountain motorsports","version":"1.0","type":"link"}