{"title":"Panhard \/ Trackbar Options","description":"\u003cp\u003e\u003cem\u003e[PLACEHOLDER — replace with RMM copy]\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"r2711","title":"Dana 30 Track Bar Bracket Replacement Kit For Jeep XJ\/TJ","description":"\u003ch3\u003eDana 30 Track Bar Bracket Replacement Kit For Jeep XJ\/TJ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Track Bar Bracket Replacement for Dana 30 Axles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory Dana 30 track bar bracket is prone to failure—especially the mounting holes. This replacement bracket is built from 3\/16\" steel and designed to take abuse. It features three mounting positions for track bar angle correction based on lift height. Direct replacement for the stock bracket and includes hardware with a locking nut for easier installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2711\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eThree mounting holes for track bar adjustment\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory bracket\u003c\/li\u003e\n\u003cli\u003eIncludes hardware with locking nut\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eFits Dana 30 front axles\u003c\/li\u003e\n\u003cli\u003eFits Jeep XJ, TJ, LJ, MJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dana 30 track bar bracket\u003c\/li\u003e\n\u003cli\u003eMounting hardware with locking nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Welding required. Make sure installation is done with proper tools and technique.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48324585029789,"sku":"PN2711-Kit-1","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2711_xj_tj_mj_zj_dana_30_44_factory_track_bar_bracket_main_v2.jpg?v=1779647247"},{"product_id":"pn2743","title":"Front Track Bar Crossover Bar Kit For Jeep XJ","description":"\u003ch3\u003eFront Track Bar Crossover Bar Kit for Jeep XJ (1984–2001)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReinforce your front end and eliminate track bar flex with a bolt-on, beefed-up solution.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis crossover track bar kit was designed to eliminate the weak points in your Jeep XJ’s front suspension. It includes a frame-reinforcing crossover bar that ties both sides of the unibody together and braces the track bar mount — so you’re not relying on thin factory metal to hold your steering together. The system uses three mounting points and works with or without frame stiffeners to keep your geometry solid on and off the trail.\u003c\/p\u003e\n\u003cp\u003eThe track bar and crossover bar are both built from heavy-duty DOM tubing — 1.25\" x .120\" wall and 1.5\" x .25\" wall — while the brackets are laser-cut from 3\/16\" steel for strength and a clean fit. Heims are fully adjustable and replaceable, allowing fine-tuning of axle position for lift heights from 1\" to 5\". This is a proper upgrade for any XJ running 3\" coils or planning long-term trail abuse.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2743\u003c\/li\u003e\n\u003cli\u003eFits Jeep Cherokee XJ (1984–2001)\u003c\/li\u003e\n\u003cli\u003eFully bolt-on frame-side installation (welding required for optional axle bracket)\u003c\/li\u003e\n\u003cli\u003eRaises front-end rigidity with crossover frame reinforcement\u003c\/li\u003e\n\u003cli\u003e3\/16\" steel brackets, laser-cut for clean fitment\u003c\/li\u003e\n\u003cli\u003eTrack bar: 1.5\" x .25\" wall DOM\u003c\/li\u003e\n\u003cli\u003eCrossover bar: 1.25\" x .120\" wall DOM\u003c\/li\u003e\n\u003cli\u003eAdjustable heims for axle positioning from 1\"–5\" lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Driver-side track bar \/ crossover bar bracket\u003c\/li\u003e\n\u003cli\u003e(1) Passenger-side crossover bar bracket\u003c\/li\u003e\n\u003cli\u003e(1) Track bar\u003c\/li\u003e\n\u003cli\u003e(1) Crossover bar\u003c\/li\u003e\n\u003cli\u003e(1) LH 7\/8\" x 7\/8\" rod end\u003c\/li\u003e\n\u003cli\u003e(1) RH 7\/8\" x 7\/8\" rod end\u003c\/li\u003e\n\u003cli\u003e(1) LH 5\/8\" x 5\/8\" rod end\u003c\/li\u003e\n\u003cli\u003e(1) RH 7\/8\" x 5\/8\" rod end\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOptional Add-Ons\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-on axle-side track bar bracket — replaces weak OEM mount for a more secure, long-term setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eBolt-on installation for the frame-side components. Welding is required if you choose to use the included replacement axle-side track bar bracket (highly recommended). Some drilling is required to size the factory axle bracket to 1\/2\" if using the OEM mount. Designed to work with lift heights from 1\"–5\" and compatible with most 3\" coil setups.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"NO \/ NO","offer_id":48324620517533,"sku":"PN2743-Kit-4","price":368.5,"currency_code":"USD","in_stock":true},{"title":"NO \/ Yes","offer_id":48324620550301,"sku":"PN2743-Kit-3","price":408.1,"currency_code":"USD","in_stock":true},{"title":"Yes \/ NO","offer_id":48324620583069,"sku":"PN2743-Kit-2","price":500.5,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Yes","offer_id":48324620615837,"sku":"PN2743-Kit-1","price":540.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2743_2.jpg?v=1779653463"},{"product_id":"r2426","title":"Heavy Duty Front Panhard \/ Track Bar For Jeep XJ\/TJ\/LJ\/ZJ\/MJ","description":"\u003ch3\u003eHeavy Duty Front Panhard \/ Track Bar For Jeep XJ\/TJ\/LJ\/ZJ\/MJ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty adjustable track bar for proper axle centering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis front panhard bar is essential for maintaining proper axle alignment when adding a suspension lift to your Jeep. The adjustable design allows for precise axle centering to restore factory geometry and eliminate steering issues that occur with lifted suspensions. Built to handle the demands of off-road use while providing reliable performance.\u003c\/p\u003e\n\u003cp\u003eConstructed from high-strength DOM steel tubing with quality rod end and polyurethane bushings for long-lasting durability. The adjustable length accommodates various lift heights and ensures proper axle positioning for optimal handling and tire wear.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2426\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep XJ, TJ, LJ, ZJ, and MJ models\u003c\/li\u003e\n\u003cli\u003eMaterial: High-strength DOM steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: Adjustable length for various lift heights\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front Panhard\/Track Bar\u003c\/li\u003e\n\u003cli\u003eHigh-quality rod end and bushings\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEssential for proper axle centering after lift installation\u003c\/li\u003e\n\u003cli\u003eAdjustable design accommodates various lift heights\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper alignment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48324644962461,"sku":"PN2426-Kit-1","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2426-jeep-xj-tj-lj-zj-mj-front-panhard-trackbar-main_2.jpg?v=1779654702"},{"product_id":"r2626-a","title":"Front Raised Trackbar Bracket For Jeep JK","description":"\u003ch3\u003eFront Raised Track Bar Bracket for Jeep JK\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRaise your roll center and improve handling with this heavy-duty track bar upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis weld-on front track bar bracket is built for Jeep JK owners running lifts of 2\" or more who want tighter handling and a smoother ride. The bracket raises the suspension roll center by up to 3.0\" when installed at the highest mounting point, reducing body roll and improving overall road feel and stability — especially on lifted rigs.\u003c\/p\u003e\n\u003cp\u003eCut from 3\/16\" steel and laser-formed for a precise fit, the bracket includes a sway bar tab that can be be welded to your axle for your application. Whether you're building a linked front end or just correcting geometry after a lift, this bracket delivers strength and adjustability in one clean package.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2626-A-Kit-1\u003c\/li\u003e\n\u003cli\u003eFits 2007–2018 Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003eRaises track bar mount up to 3.0\" for improved roll center\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicles with 2\" or more of lift.\u003c\/li\u003e\n\u003cli\u003eLaser-cut from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes weld-on sway bar relocation tab\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld-on front track bar bracket\u003c\/li\u003e\n\u003cli\u003e(1) Sway bar relocation tab (weld-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. Designed for 2007–2018 Jeep JK front axle housings. Trim bracket to match your track bar angle if running stock to 3\" of lift. Intended to correct geometry and improve handling on lifted Jeeps.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363450564765,"sku":"PN2626-A-Kit-1","price":72.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2626-A-Kit-1-front-raised-trackbar-bracket-for-jeep-jk-ruffstuff-specialties-2.webp?v=1780418651"},{"product_id":"r2427","title":"Ruffstuff Adjustable Rear Track Bar For Jeep TJ\/LJ","description":"\u003ch3\u003eHD Adjustable Rear Track Bar For Jeep TJ\/LJ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty adjustable track bar for proper axle centering after lift installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adjustable rear track bar is essential for maintaining proper rear axle alignment when adding a suspension lift to your Jeep TJ or LJ. The strategic bends in the track bar design provide clearance for most aftermarket differential covers while maintaining the strength needed for demanding off-road use. Perfect for restoring factory geometry and eliminating the side-to-side axle shift that occurs with lifted suspensions.\u003c\/p\u003e\n\u003cp\u003eConstructed from 1.5\" x .250 wall DOM steel tubing for maximum durability and features a 7\/8\" chromoly rod end at the axle connection with polyurethane bushings at the frame bracket. The adjustable design allows for precise axle centering to match your specific lift height and setup.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2427\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep TJ and LJ Wrangler models\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5\" x .250 wall DOM steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: Strategic bends for diff cover clearance\u003c\/li\u003e\n\u003cli\u003eDesign: Adjustable length with 7\/8\" chromoly rod end and poly bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adjustable Rear Track Bar\u003c\/li\u003e\n\u003cli\u003e1x 7\/8\" Chromoly Rod End\u003c\/li\u003e\n\u003cli\u003eFrame bracket with polyurethane bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEssential for proper axle centering after suspension lift installation\u003c\/li\u003e\n\u003cli\u003eBent design provides clearance for most aftermarket differential covers\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper alignment and safety\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458199709,"sku":"PN2427-Kit-1","price":256.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2427-tj-lj-_20wrangler-adjustable-rear-track-bar-2.jpg?v=1780418829"},{"product_id":"r2395","title":"Front Trackbar Relocation Overlay Plate For Jeep TJ","description":"\u003ch3\u003eFront Track Bar Relocation Overlay Plate for Jeep TJ \/ LJ \/ XJ \/ MJ \/ ZJ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReinforce your axle-side track bar mount and correct geometry up to 3\" of lift.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis overlay plate bolts directly to your factory front track bar bracket, reinforcing the axle-side mounting hole and adding a second hole for use with a stock track bar at lift heights up to 3\". Made from 1\/4\" thick laser-cut steel, it’s a simple upgrade that helps prevent ovaled-out holes and sloppy steering — especially on older or lifted rigs.\u003c\/p\u003e\n\u003cp\u003eIf your factory bracket is starting to wallow out or you’re setting up a mild lift, this is the quick, effective fix. Stronger, cleaner, and easier than replacing the whole bracket.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2395\u003c\/li\u003e\n\u003cli\u003e1\/4\" laser-cut steel overlay plate\u003c\/li\u003e\n\u003cli\u003eAdds a second bolt hole for use with 0–3\" lift on factory track bar\u003c\/li\u003e\n\u003cli\u003eReinforces axle-side track bar bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFits:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1997–2006 Jeep Wrangler (TJ)\u003c\/li\u003e\n\u003cli\u003e2004–2006 Jeep Wrangler (LJ)\u003c\/li\u003e\n\u003cli\u003e1987–2001 Jeep Cherokee (XJ)\u003c\/li\u003e\n\u003cli\u003e1987–1992 Jeep Comanche (MJ)\u003c\/li\u003e\n\u003cli\u003e1993–1998 Jeep Grand Cherokee (ZJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Track bar relocation overlay plate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eBolt-on installation. No welding required. Designed to reinforce and adjust the factory axle-side track bar bracket for use with 0–3\" of lift and a factory-style track bar. Ideal for rigs with wallowed-out bolt holes or mild lift setups.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363458330781,"sku":"PN2395","price":13.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2395-front-trackbar-relocation-overlay-plate-for-jeep-tj-ruffstuff-specialties-1.webp?v=1780418836"},{"product_id":"pn1988-a","title":"Weld on Rear Adjustable Axle Track Bar \/ Upper Control Arm Bracket 3\"-3.5\" Axle Tube For Jeep TJ","description":"\u003ch4\u003eWeld on Rear Adjustable Axle Track Bar \/ Upper Control Arm Bracket 3\"-3.5\" Axle Tube For Jeep TJ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEssential bracket for Ford 8.8 rear axle swaps in TJ Wranglers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis weld-on bracket is a critical component for adapting the popular Ford 8.8\" rear end to your Jeep Wrangler TJ's stock suspension mounting points. Whether you're upgrading from the factory Dana 35 for better strength and gear ratios, or building a serious trail rig, this bracket ensures proper track bar and upper control arm positioning. Part of the complete TJ axle swap solution that makes Ford 8.8 swaps straightforward and reliable.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for 3.25\" tube diameter of the Ford 8.8 but adaptable for any tube diameter from 3\" to 3.5\" with minor adjustments. Features mounting points for your existing 2\" wide upper control arm and 1 5\/8\" wide track bar for seamless integration with factory suspension geometry.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1988-A\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep TJ, Ford 8.8 rear axle, 3\"-3.5\" tube diameter\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 2\" upper control arm mount, 1 5\/8\" track bar mount, 7.5 pounds\u003c\/li\u003e\n\u003cli\u003eDesign: Weld-on installation, adjustable track bar and upper control arm mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Weld On Rear Axle Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional welding required for installation\u003c\/li\u003e\n\u003cli\u003ePart of complete TJ axle swap kit - coil spring buckets and shock mounts available separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363468357789,"sku":"PN1988-A-Kit-1","price":106.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1988-weld-on-rear-adjustable-axle-track-bar-upper-control-arm-bracket-3-to-3-point-5-inches-axle-tube-for-jeep-tj-image-1-ruffstuff-specialties.webp?v=1780419053"},{"product_id":"r1637","title":"HD Front Panhard \/ Track Bar For Jeep JK","description":"\u003ch3\u003eHD Front Panhard \/ Track Bar For Jeep JK\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty adjustable track bar for lifted JK Wranglers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis front panhard bar is essential for maintaining proper axle alignment when adding a 2.5\" or higher lift to your Jeep JK. The strategic bends provide clearance for most aftermarket differential covers while the adjustable design allows for precise axle centering to restore factory geometry and eliminate steering issues.\u003c\/p\u003e\n\u003cp\u003eConstructed from 1.5\" x .250 wall DOM steel tubing for maximum durability and features a 7\/8\" chromoly heim joint with misalignment spacers at the axle end. The frame connection uses high-quality polyurethane bushings with steel sleeves for long-lasting performance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1637\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep JK Wrangler up to 2.5\" lift (our raised trackbar bracket \"R2626\" is required for lifts over 2.5\")\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5\" x .250 wall DOM steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 30.500\" eye to eye fully collapsed\u003c\/li\u003e\n\u003cli\u003eDesign: Adjustable with bends for diff cover clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front Panhard\/Track Bar\u003c\/li\u003e\n\u003cli\u003e1x 7\/8\" Chromoly Heim with 9\/16\" misalignment spacers\u003c\/li\u003e\n\u003cli\u003e2x High-quality poly bushings with 9\/16\" inner sleeves\u003c\/li\u003e\n\u003cli\u003eComplete 9\/16\" Grade 8 hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRequires minimum 2.5\" lift or more for proper fitment\u003c\/li\u003e\n\u003cli\u003eAxle and frame brackets require drilling to accept 9\/16\" hardware\u003c\/li\u003e\n\u003cli\u003eFor use with stock frame and axle brackets (1 5\/8\" mounting width)\u003c\/li\u003e\n\u003cli\u003eImages may not exactly depict product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363476943005,"sku":"PN1637-Kit-1","price":256.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1637-ruffstuff-front-panhard-track-bar-for-jeep-jk-ruffstuff-specialties-1.webp?v=1780419204"},{"product_id":"r1353","title":"Panhard Kit \/ TrackBar","description":"\u003ch3\u003ePanhard \/ Track Bar Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComplete kit for centering axles and correcting geometry after a lift—built for adjustability and strength.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLifting your rig without adjusting the panhard bar means your axle shifts to the driver side—simple fact of suspension geometry. This kit gives you everything you need to correct that shift and dial in proper alignment. It includes both frame- and axle-side brackets, 1.5\" x .25\" wall DOM tubing, heat-treated heims, weld-in hex bungs, high-misalignment spacers, and all necessary hardware. Whether you're running stock-width or full-width axles, the bracket options let you tailor the setup to your build.\u003c\/p\u003e\n\u003cp\u003eChoose between centered or offset axle brackets depending on clearance and geometry needs. The hex bungs make on-rig adjustment easy with a wrench, and the heavy-duty components are built for long-term use. Whether it’s your daily, a trail rig, or a full-on crawler, this kit helps you get your front end back where it belongs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1353\u003c\/li\u003e\n\u003cli\u003eCenters axle and corrects geometry after suspension lift\u003c\/li\u003e\n\u003cli\u003eFrame brackets work with stock or full-width axles\u003c\/li\u003e\n\u003cli\u003eIncludes both centered and offset axle brackets\u003c\/li\u003e\n\u003cli\u003eBuilt for strength, adjustability, and long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e43\" of 1.5\" O.D. x .25\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003e(1) Frame-side bracket\u003c\/li\u003e\n\u003cli\u003e(1) Centered axle bracket\u003c\/li\u003e\n\u003cli\u003e(1) Offset axle bracket\u003c\/li\u003e\n\u003cli\u003e(2) 7\/8\" heat-treated heims\u003c\/li\u003e\n\u003cli\u003e(4) High-misalignment spacers (9\/16\" bore)\u003c\/li\u003e\n\u003cli\u003e(2) Hex weld-in bungs for 7\/8\" heims\u003c\/li\u003e\n\u003cli\u003e(2) Grade 8 bolts with lock nuts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"No DOM Tubing \/ Axle Centered Panhard \/ Frame Inside Panhard","offer_id":48363485233309,"sku":"PN1353-Kit-7","price":203.28,"currency_code":"USD","in_stock":true},{"title":"No DOM Tubing \/ Axle Centered Panhard \/ Frame Outside Panhard","offer_id":48363485266077,"sku":"PN1353-Kit-8","price":203.28,"currency_code":"USD","in_stock":true},{"title":"No DOM Tubing \/ Axle Offset Panhard \/ Frame Inside Panhard","offer_id":48363485298845,"sku":"PN1353-Kit-5","price":203.28,"currency_code":"USD","in_stock":true},{"title":"No DOM Tubing \/ Axle Offset Panhard \/ Frame Outside Panhard","offer_id":48363485331613,"sku":"PN1353-Kit-6","price":203.28,"currency_code":"USD","in_stock":true},{"title":"Include DOM Tubing \/ Axle Centered Panhard \/ Frame Inside Panhard","offer_id":48363485364381,"sku":"PN1353-Kit-3","price":252.56,"currency_code":"USD","in_stock":true},{"title":"Include DOM Tubing \/ Axle Centered Panhard \/ Frame Outside Panhard","offer_id":48363485397149,"sku":"PN1353-Kit-4","price":252.56,"currency_code":"USD","in_stock":true},{"title":"Include DOM Tubing \/ Axle Offset Panhard \/ Frame Inside Panhard","offer_id":48363485429917,"sku":"PN1353-Kit-1","price":252.56,"currency_code":"USD","in_stock":true},{"title":"Include DOM Tubing \/ Axle Offset Panhard \/ Frame Outside Panhard","offer_id":48363485462685,"sku":"PN1353-Kit-2","price":252.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1353-panhard-kit-trackbar-image-1-ruffstuff-specialties.webp?v=1780419397"},{"product_id":"r1331","title":"DOM Tube, 1.5\" X .25\" Wall, 1\" Tube ID","description":"\u003ch3\u003eDOM Tube, 1.5\" x .25\" Wall (1\" ID)\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eHeavy-Wall DOM Tubing for Steering Applications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis 1.5\" x .25\" wall DOM tubing (1\" ID) is widely used in steering systems that utilize Heim joints or tie rod ends. Its heavy wall thickness makes it strong enough to handle the stresses and impacts common in off-road steering setups. This is the same tubing we use for our steering kits.\u003c\/p\u003e\n\u003cp\u003eTubing is sold in 1-foot increments with a starting minimum of 3 foot. Pre-cut lengths up to 6 ft ship via UPS Ground. For full stick pricing (~20 ft), commercial freight delivery is required. Ordering multiple sticks is the most cost-effective, as freight charges are similar whether shipping one or several sticks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1331\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x .25\" wall thickness\u003c\/li\u003e\n\u003cli\u003e1\" inner diameter (ID)\u003c\/li\u003e\n\u003cli\u003ePrecision DOM (Drawn Over Mandrel) steel tubing\u003c\/li\u003e\n\u003cli\u003eIdeal for steering setups using Heim joints or tie rod ends\u003c\/li\u003e\n\u003cli\u003eHeavy wall construction for maximum strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAvailable Kit Options\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e36\"\u003c\/li\u003e\n\u003cli\u003e48\"\u003c\/li\u003e\n\u003cli\u003e54\" (Steering Kit Length)\u003c\/li\u003e\n\u003cli\u003e60\"\u003c\/li\u003e\n\u003cli\u003e72\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"36\"","offer_id":48363487690909,"sku":"PN1331-Kit-3","price":79.99,"currency_code":"USD","in_stock":true},{"title":"48\"","offer_id":48363487723677,"sku":"PN1331-Kit-4","price":106.66,"currency_code":"USD","in_stock":true},{"title":"54\" (Steering Kit Length)","offer_id":48363487756445,"sku":"PN1331-Kit-5","price":119.99,"currency_code":"USD","in_stock":true},{"title":"60\"","offer_id":48363487789213,"sku":"PN1331-Kit-6","price":133.32,"currency_code":"USD","in_stock":true},{"title":"72\"","offer_id":48363487821981,"sku":"PN1331-Kit-7","price":159.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/DOM2_eedc2b91-0bf6-45da-b256-9e263084c283.jpg?v=1780419421"},{"product_id":"r1173","title":"Offset Axle Panhard Bracket","description":"\u003ch3\u003eOffset Axle Panhard Bracket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty offset panhard bracket with multiple mounting options.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis offset panhard\/track bar bracket provides three mounting positions at 4\", 5\", and 6\" from axle center, giving flexibility for fine-tuning suspension geometry. Designed to fit a 3\" axle tube, it can also be modified to work with other axle tube sizes as needed. Built from 1\/4\" steel plate, it includes a reinforcement plate for added strength once welded in place.\u003c\/p\u003e\n\u003cp\u003eThe bracket has a 2\" inside width and comes drilled for 9\/16\" bolts, making it compatible with standard suspension hardware. Sold individually, it's built for durability and customization in demanding suspension setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1173\u003c\/li\u003e\n\u003cli\u003eOffset design with 3 mounting positions (4\", 5\", 6\" from axle center)\u003c\/li\u003e\n\u003cli\u003eCut for 3\" axle tubes (modifiable for other tube sizes)\u003c\/li\u003e\n\u003cli\u003e2\" inside width, drilled for 9\/16\" bolts\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4\" steel plate\u003c\/li\u003e\n\u003cli\u003eReinforcement plate included for welding\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Offset Axle Panhard Bracket\u003c\/li\u003e\n\u003cli\u003e(1) Reinforcement Plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWelding required for installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for 3\" axle tubes—modification may be needed for other diameters.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363498111133,"sku":"PN1173-Kit-1","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1173-offset-axle-panhard-bracket-image-1-ruffstuff-specialties.webp?v=1780419574"},{"product_id":"r1154","title":"Frame Outside Panhard Bracket","description":"\u003ch3\u003eFrame Outside Panhard \/ Track Bar Bracket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrame-mounted track bar bracket for wide axle setups and custom suspension geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis outside-the-frame panhard bracket is designed for custom suspension setups running wider-than-stock axles. It mounts directly to the outside face of the frame rail, making it ideal for full-width axle swaps or high-clearance builds where you need the bar pushed outboard for proper alignment.\u003c\/p\u003e\n\u003cp\u003eMade from 1\/4\" steel, the bracket features a 2\" inside diameter and includes a weld-on reinforcement plate for added strength. It offers 3 mounting heights — 2\", 3.25\", and 4.5\" from the bottom of the frame — to help fine-tune your panhard angle and ride geometry. Clean, compact, and easy to weld into any serious build.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1154\u003c\/li\u003e\n\u003cli\u003eMounts to outside of frame rail\u003c\/li\u003e\n\u003cli\u003e2\" inside diameter\u003c\/li\u003e\n\u003cli\u003e1\/4\" steel construction\u003c\/li\u003e\n\u003cli\u003e3 mounting positions: 2\", 3.25\", and 4.5\" from bottom of frame\u003c\/li\u003e\n\u003cli\u003eIncludes reinforcement plate for added strength\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Frame-side track bar bracket\u003c\/li\u003e\n\u003cli\u003e(1) Weld-on reinforcement plate\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. Designed to mount on the outside of the frame and ideal for use with wide axle setups. Always mock up and verify panhard clearance and bar angle before final welding.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499225245,"sku":"PN1154-Kit-1","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1154-Kit-1-frame-outside-panhard-bracket-ruffstuff-specialties-1.webp?v=1780419600"},{"product_id":"r1148","title":"Frame Inside Panhard \/ Track Bar Bracket","description":"\u003ch3\u003eFrame Inside Panhard \/ Track Bar Bracket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompact track bar bracket built for tight setups and stock-width axles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis inside-the-frame track bar bracket is ideal for custom suspension setups using stock-width axles where packaging is tight. It’s designed to weld directly to the inside face of your frame and provides three mounting heights — 2\", 3.25\", and 4.5\" — measured from the bottom of the frame. That flexibility makes it easy to dial in proper panhard angle and suspension geometry.\u003c\/p\u003e\n\u003cp\u003eLaser cut from 1\/4\" plate, this bracket has a 2\" ID and includes a weld-on reinforcement plate for added strength. Whether you're setting up a fresh 4-link or tightening up a front-end rebuild, this is a clean, purpose-built solution that doesn’t take up more space than it needs to.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1148\u003c\/li\u003e\n\u003cli\u003eMounts to inside of frame rail\u003c\/li\u003e\n\u003cli\u003e2\" inside diameter\u003c\/li\u003e\n\u003cli\u003e1\/4\" steel construction\u003c\/li\u003e\n\u003cli\u003e3 mounting heights: 2\", 3.25\", and 4.5\" from bottom of frame\u003c\/li\u003e\n\u003cli\u003eIncludes reinforcement plate for added strength\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Frame-side track bar bracket\u003c\/li\u003e\n\u003cli\u003e(1) Weld-on reinforcement plate\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWelding required. This bracket is designed to mount on the inside of the frame and is best suited for rigs using stock-width axles. Make sure to mock up and tack in place before final welding to ensure correct panhard alignment.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363499651229,"sku":"PN1148-Kit-1","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1148-frame-inside-panhard-track-bar-bracket-ruffstuff-specialties-1.webp?v=1780419605"},{"product_id":"pn1099","title":"Centered Axle Panhard Bracket","description":"\u003ch3\u003eCentered Axle Panhard Bracket\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThree-Position Mount for Custom Track Bar Setups\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis centered axle panhard (track bar) bracket is built for strength and flexibility. Designed to fit a 3\" axle tube, it’s made from 1\/4\" plate steel and comes with a weld-in reinforcement plate for added durability. The bracket features a 2\" inside mounting width with 9\/16\" holes, and three vertical mounting positions at 3-7\/8\", 4-7\/8\", and 5-7\/8\" from the base—giving you options to fine-tune your suspension geometry.\u003c\/p\u003e\n\u003cp\u003eAlthough cut for a 3\" axle tube, the bracket can be modified to fit other axle sizes as needed. Perfect for builders looking for a reliable and adjustable track bar mount that won’t flex or fatigue under real-world trail use.\u003c\/p\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1099\u003c\/li\u003e\n\u003cli\u003eFits 3\" axle tube (modification required for other sizes)\u003c\/li\u003e\n\u003cli\u003e2\" inside mounting width with 9\/16\" bolt holes\u003c\/li\u003e\n\u003cli\u003eThree vertical mounting heights: 3-7\/8\", 4-7\/8\", 5-7\/8\"\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4\" plate steel\u003c\/li\u003e\n\u003cli\u003eIncludes weld-in reinforcement plate\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363502272669,"sku":"PN1099-Kit-1","price":37.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1099-centered-axle-panhard-bracket-ruffstuff-specialties-1.webp?v=1780419660"}],"url":"https:\/\/rileymountainmotorsports.com\/collections\/panhard-trackbar-options.oembed","provider":"Riley mountain motorsports","version":"1.0","type":"link"}