{"title":"Tie Rod End Steering Accessories","description":"\u003cp\u003e\u003cem\u003e[PLACEHOLDER — replace with RMM copy]\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"r2826","title":"The Cure! For Jeep Moog Tie Rod Ends","description":"\u003ch3\u003eThe Cure! For Jeep Moog Tie Rod Ends\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFix Moog tie rod end problems in your Jeep.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cure for Moog tie rod ends solves common steering issues specific to Jeep builds using Moog components. This specialized solution addresses problems that occur when using Moog tie rod ends in off-road applications, providing the reliability you need for trail adventures. Essential for builders experiencing steering issues with Moog components.\u003c\/p\u003e\n\u003cp\u003eLightweight steel construction at 0.1 lbs, designed specifically for Jeep XJ Cherokee applications with Moog tie rod ends. Built to handle off-road conditions and provide long-lasting performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2826\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep XJ Cherokee with Moog tie rod ends\u003c\/li\u003e\n\u003cli\u003eMaterial: Acetal\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.1 lbs total weight\u003c\/li\u003e\n\u003cli\u003eDesign: Specific solution for Moog tie rod end compatibility issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe Cure component for Moog tie rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for use with Moog tie rod ends in Jeep XJ Cherokee\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363448107165,"sku":"PN2826","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/Pic2.webp?v=1780418557"},{"product_id":"r2589","title":"Replacement Tie Rod End Boot","description":"\u003ch4\u003eReplacement Tie Rod End Boot\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement boot for protecting tie rod end joints.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement tie rod end boot provides essential protection for your steering components by keeping dirt, debris, and moisture out of the joint. Essential for maintaining proper lubrication and extending the life of your tie rod ends, especially in demanding off-road conditions where contamination is a constant threat.\u003c\/p\u003e\n\u003cp\u003eMade from durable rubber construction that withstands the elements while maintaining flexibility for proper joint movement. The boot design ensures a secure seal while allowing for the articulation needed during steering operation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2589\u003c\/li\u003e\n\u003cli\u003eFitment: Universal tie rod end applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Durable rubber construction\u003c\/li\u003e\n\u003cli\u003eDimensions: Standard tie rod end boot sizing\u003c\/li\u003e\n\u003cli\u003eDesign: Flexible seal for joint protection and articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Replacement Tie Rod End Boot\u003c\/li\u003e\n\u003cli\u003eDurable rubber construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEssential for protecting tie rod end joints from contamination\u003c\/li\u003e\n\u003cli\u003eMaintains proper lubrication for extended component life\u003c\/li\u003e\n\u003cli\u003eCritical for off-road applications with high debris exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"#\" class=\"rs-jump-btn\"\u003e Start your selection \u003c\/a\u003e\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Replacement Tie Rod End Boot","offer_id":48363452661917,"sku":"PN2589-Kit-1","price":11.0,"currency_code":"USD","in_stock":true},{"title":"For Y Link","offer_id":48363452694685,"sku":"PN2589-Kit-2","price":11.0,"currency_code":"USD","in_stock":true},{"title":"For Offset - LH","offer_id":48363452727453,"sku":"PN2589-Kit-3","price":11.0,"currency_code":"USD","in_stock":true},{"title":"For Offset  - RH","offer_id":48363452760221,"sku":"PN2589-Kit-4","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r2589-01-replacement-grease-boot-main-1.jpg?v=1780418708"},{"product_id":"r2183","title":"FJ80 Tie Rod Right Hand (M23x1.5)","description":"\u003ch3\u003eFJ80 Tie Rod End — Right-Hand (M23 × 1.5)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRight-hand FJ80 TRE for crossover\/high steer kits (M23 × 1.5)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis right-hand-thread tie rod end fits Toyota FJ80 high steer\/crossover applications that use the FJ80 TRE taper. Threads are M23 × 1.5 RH to match common FJ80-pattern link hardware and adjusters. It includes a thick grease boot and installs with the supplied castle nut, cotter pin, and jam nut.\u003c\/p\u003e\n\u003cp\u003eUse this RH end with a left-hand TRE on the opposite side to allow on-vehicle toe adjustment. The part is sold individually; verify taper compatibility with your steering arms before installation. After assembly, torque the castle nut to spec, insert a new cotter pin, and grease through the boot fitting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2183\u003c\/li\u003e\n\u003cli\u003eThread: M23 × 1.5, right-hand\u003c\/li\u003e\n\u003cli\u003eApplication: FJ80 TRE taper for Toyota crossover\/high steer kits\u003c\/li\u003e\n\u003cli\u003eHeavy-duty housing with thick grease boot\u003c\/li\u003e\n\u003cli\u003eIncludes castle nut, cotter pin, and jam nut\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eConfirm you are pairing this RH-thread TRE with an LH-thread TRE on the opposite side for proper adjustment. Do not force an FJ80 TRE into non-matching tapers; if reaming is required, use the correct FJ80 TRE reamer. Follow factory torque specs and verify full steering clearance after installation.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363462099101,"sku":"PN2183","price":44.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2183-fj80-tie-rod-right-hand-m23x1-5-ruffstuff-specialties-1.webp?v=1780418950"},{"product_id":"r2118","title":"Reamer for GM 1 Ton TRE's","description":"\u003ch3\u003eReamer for GM 1 Ton TRE's\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e7°\/1.5\" per foot flute reamer for Chevy style heavy duty tie rod ends\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the essential tool you need to ream out your knuckles to fit our GM 1 Ton TRE's. If you want to stay DOT approved and not upgrade to Heim Tie Rod's, this is your tool. Perfect for fabricators and DIY mechanics who need precision reaming for heavy-duty steering components. It will also work for our High Angle Drag Link tapering needs - you just have to drill a little further.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Chevy style heavy duty tie rod ends with a 7°\/1.5\" per foot taper. Overall length is 6-1\/2\" with a 4-1\/2\" flute length and 1\/2\" shank diameter featuring a square end for secure gripping. Can be used by hand with a tap wrench, in a drill press, or vertical mill with a 1\/2\" or larger drill chuck or collet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2118\u003c\/li\u003e\n\u003cli\u003eGM 1 Ton TRE fitment and High Angle Drag Link applications\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction for durability\u003c\/li\u003e\n\u003cli\u003eOverall length: 6-1\/2\", flute length: 4-1\/2\", shank diameter: 1\/2\"\u003c\/li\u003e\n\u003cli\u003e7°\/1.5\" per foot taper specification with square end design\u003c\/li\u003e\n\u003cli\u003eMultiple usage options: hand operation, drill press, or vertical mill compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Reamer for GM 1 Ton TRE's\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCutting oil or WD-40 recommended to keep cool and smooth during operation\u003c\/li\u003e\n\u003cli\u003eIf using with drill press or mill, cut off square end before chucking to distribute clamping force\u003c\/li\u003e\n\u003cli\u003eChucking only the square portion will cause tool to shatter during use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363463049373,"sku":"PN2118","price":108.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2118-reamer-for-gm-1-ton-tres-image-1-ruffstuff-specialties.webp?v=1780418981"},{"product_id":"r2092","title":"TRE, High Angle Drag Link, ES2026R","description":"\u003ch3\u003eTRE, High Angle Drag Link\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-angle tie rod end for extreme steering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis high angle drag link tie rod end is designed for extreme steering applications where standard tie rod ends can't handle the required angles. Perfect for builds with significant suspension travel or modified steering geometry, this ES2026R provides the articulation needed for proper steering function. Essential for builds where steering components must operate at extreme angles without binding.\u003c\/p\u003e\n\u003cp\u003eBuilt around the proven ES2026R tie rod end with high-angle design. At 2.4 lbs, this component provides the strength needed for off-road use while allowing the extreme articulation required for modified steering systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2092\u003c\/li\u003e\n\u003cli\u003eFitment: Universal with ES2026R tie rod end compatibility\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.4 lbs weight\u003c\/li\u003e\n\u003cli\u003eDesign: High-angle drag link for extreme steering applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh angle drag link assembly\u003c\/li\u003e\n\u003cli\u003eES2026R tie rod end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for extreme steering angle applications\u003c\/li\u003e\n\u003cli\u003eCompatible with ES2026R tie rod end specifications\u003c\/li\u003e\n\u003cli\u003eEssential for builds with modified steering geometry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363464032413,"sku":"PN2092-Kit-1","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2092-Edit.jpg?v=1780419009"},{"product_id":"r2008","title":"The Cure! for Jeep (CJ\/YJ\/TJ \/XJ)","description":"\u003ch3\u003eThe Cure! for Jeep (CJ\/YJ\/TJ \/XJ)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFix your Jeep steering problems for good.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cure solves common steering issues that plague Jeep CJ, YJ, TJ, and XJ builds. This proven solution addresses steering problems that keep you off the trail, providing reliable performance when you need it most. Perfect for both new builders and experienced off-roaders looking for a dependable fix.\u003c\/p\u003e\n\u003cp\u003eBuilt from quality steel to handle off-road abuse and provide long-lasting performance. Lightweight at 0.1 lbs and designed specifically for classic Jeep platforms.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2008\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep CJ5\/CJ7\/CJ8, YJ, TJ, XJ Cherokee\u003c\/li\u003e\n\u003cli\u003eMaterial: Acetal\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.1 lbs total weight\u003c\/li\u003e\n\u003cli\u003eDesign: Direct replacement solution for steering issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe Cure steering component\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with CJ, YJ, TJ, and XJ platforms - verify fitment for your specific year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363468259485,"sku":"PN2008","price":23.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R2008-full.jpg?v=1780419048"},{"product_id":"r1942","title":"7\/8\" TRE Jam Nut (18TPI) Left Hand","description":"\u003ch3\u003e7\/8\" TRE Jam Nut (18 TPI) Left Hand\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSecure Your GM Tie Rod Ends with Confidence\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis left-hand thread jam nut is designed to fit 7\/8\"-18 TPI GM tie rod ends, providing a secure lock for your steering components. Made from high-quality steel and zinc\/nickel plated for corrosion resistance, it offers long-lasting performance even in harsh conditions. A reliable choice for keeping your steering tight and precise.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1942\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits 7\/8\"-18 TPI GM tie rod ends\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread\u003c\/li\u003e\n\u003cli\u003eZinc and nickel plated for durability\u003c\/li\u003e\n\u003cli\u003eHigh-quality steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363471143069,"sku":"PN1942","price":4.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1942-7-8-inch-tre-jam-nut-18-tpi-left-hand-image-2-ruffstuff-specialties.webp?v=1780419081"},{"product_id":"r1848","title":"3\" Drop Pitman Arm","description":"\u003ch3\u003e3\" Drop Pitman Arm\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCorrect steering geometry for crossover and high-steer setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 3\" Drop Pitman Arm is designed for crossover and high-steer steering setups, providing critical correction to steering geometry on lifted rigs. It's built to work with 2WD steering boxes or 4WD boxes converted with a 2WD sector shaft, and features a GM-style taper that matches ES2027L or ES2026R tie rod ends. Perfect for 32-spline boxes with 4 keyways—this arm has no indexing keys, allowing it to be positioned in any direction for optimal fitment.\u003c\/p\u003e\n\u003cp\u003eMeasuring 6.5\" center-to-center, it's longer than most OEM arms and helps improve leverage and steering response. The tapered hole is reamed specifically for 1-ton high-angle tie rod ends, ensuring durability and performance for off-road or heavy-duty use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e This arm fits many common Jeep steering boxes, but it is about 1\" longer than stock. Always verify clearance around the panhard and other suspension components before installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1848\u003c\/li\u003e\n\u003cli\u003eFits: 1984–2001 Jeep Cherokee (XJ)\u003c\/li\u003e\n\u003cli\u003eFits: 1997–2006 Jeep Wrangler (TJ)\u003c\/li\u003e\n\u003cli\u003eFits: 1987–1995 Jeep Wrangler (YJ)\u003c\/li\u003e\n\u003cli\u003eFits: 2004–2006 Jeep Wrangler (LJ)\u003c\/li\u003e\n\u003cli\u003e3\" drop helps correct steering angles on lifted Jeeps\u003c\/li\u003e\n\u003cli\u003eIdeal for rigs with crossover or high-steer setups\u003c\/li\u003e\n\u003cli\u003eIndexable design—no keyways\u003c\/li\u003e\n\u003cli\u003eGM taper fits ES2027L\/ES2026R tie rod ends\u003c\/li\u003e\n\u003cli\u003e6.5\" length from center-to-center for improved leverage\u003c\/li\u003e\n\u003cli\u003eForged from high-strength steel for extreme durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended for up to 3.5\" lift on Wranglers, or stock-height Cherokees running crossover.\u003c\/p\u003e\n\u003cp\u003eIf you're upgrading to 1-ton steering or adding high steer, this drop pitman arm is a must-have to keep things aligned and predictable on and off the trail.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363471995037,"sku":"PN1848","price":67.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1848-3-inches-drop-pitman-arm-image-1-ruffstuff-specialties.webp?v=1780419103"},{"product_id":"r1768","title":"The Cure!","description":"\u003ch3\u003eThe Cure!\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFix your steering woes once and for all.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cure is designed to solve common steering problems in Jeep builds and off-road vehicles. This component addresses steering issues that plague many builds, providing a reliable solution that gets you back on the trail with confidence. Perfect for both beginners and experienced builders looking for a proven fix.\u003c\/p\u003e\n\u003cp\u003eBuilt from quality materials to withstand off-road abuse and provide long-lasting performance. Compatible with multiple Jeep platforms including CJ, YJ, TJ, XJ, and ZJ models.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1768 for Old Style and PN2481 For New Style\u003c\/li\u003e\n\u003cli\u003eFitment: Jeep CJ5\/CJ7\/CJ8, YJ, TJ, XJ Cherokee, ZJ Grand Cherokee\u003c\/li\u003e\n\u003cli\u003eMaterial: Acetal\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.1 lbs total weight\u003c\/li\u003e\n\u003cli\u003eDesign: Direct replacement solution for common steering issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe Cure steering component\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with multiple Jeep platforms - check fitment for your specific year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Old Style TRE's","offer_id":48363474583709,"sku":"PN1768-Kit-1","price":27.48,"currency_code":"USD","in_stock":true},{"title":"New Style Ruffstuff TRE's","offer_id":48363474616477,"sku":"PN2481-Kit-1","price":27.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1768_00-3_65c79172-0cdc-484d-974e-ec6ef3200aff.webp?v=1780419140"},{"product_id":"r1717","title":"Steering Stabilizer Plate 90 Degree with Hardware","description":"\u003ch3\u003eSteering Stabilizer Plate 90 Degree with Hardware\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal steering stabilizer mounting solution for 1.5\" OD tie rods.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis steering stabilizer mounting plate provides a reliable solution for mounting your steering stabilizer to your tie rod in universal applications. The 90-degree design offers optimal positioning and clearance while maintaining strength and durability for off-road and heavy-duty use.\u003c\/p\u003e\n\u003cp\u003eConstructed for 1.5\" OD tubing with a 1\/2\" mounting hole. The plate design ensures secure attachment and proper alignment of your steering stabilizer system. Complete hardware kit included for easy installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1717\u003c\/li\u003e\n\u003cli\u003eFitment: Universal applications with 1.5\" OD tie rods\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 90-degree mounting angle, 1\/2\" mounting hole\u003c\/li\u003e\n\u003cli\u003eSpecial design features: Complete hardware kit included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Mounting Plate\u003c\/li\u003e\n\u003cli\u003e2x U-bolts\u003c\/li\u003e\n\u003cli\u003e4x Washers\u003c\/li\u003e\n\u003cli\u003e4x Nylock Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 1.5\" OD tubing applications only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363475697821,"sku":"PN1717-Kit-1","price":37.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1717-steering-stabilizer-plate-90-degree-with-hardware-image-1-ruffstuff-specialties.webp?v=1780419158"},{"product_id":"r1713","title":"Flat Mount Steering Stabilizer Bracket with Hardware","description":"\u003ch3\u003eFlat Mount Steering Stabilizer Bracket with Hardware\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eClamp-on bracket for mounting a steering stabilizer to a 1.5\" OD tie rod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket provides a flat-mount solution to attach a steering stabilizer directly to the tie rod. It clamps with U-bolts (no welding) and uses a 1\/2\" hole in the plate for common stabilizer hardware. Hardware is included for a straightforward install on compatible tie rods.\u003c\/p\u003e\n\u003cp\u003eFitment is for 1.5\" outside-diameter tubing only; verify your tie rod size and stabilizer stroke before positioning the bracket. Place the bracket to avoid interference at full bump and full steering lock, and confirm clearance to the drag link and differential cover. Torque the nylock nuts to spec and recheck after initial use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1713\u003c\/li\u003e\n\u003cli\u003eFits 1.5\" OD tie rods (clamp-on)\u003c\/li\u003e\n\u003cli\u003e1\/2\" mounting hole in plate\u003c\/li\u003e\n\u003cli\u003eIncludes U-bolts, washers, and nylock nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Mounting plate\u003c\/li\u003e\n\u003cli\u003e(2) U-bolts\u003c\/li\u003e\n\u003cli\u003e(4) Washers\u003c\/li\u003e\n\u003cli\u003e(4) Nylock nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eCompatible only with 1.5\" OD tubing. Verify clearance at full bump\/steer and re-torque hardware after shakedown.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363475730589,"sku":"PN1713-Kit-1","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1713-flat-mount-steering-stabilizer-bracket-with-hardware-ruffstuff-specialties-1.webp?v=1780419160"},{"product_id":"r1697","title":"HD 1.50\" OD Steering Tube Clamp","description":"\u003ch3\u003eHD 1.50\" OD Steering Tube Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty 6-bolt clamp for secure mounting on 1.5\" OD tubes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis tube clamp is perfect for mounting steering stabilizers to our steering kits, creating removable racks, engine braces, or any application requiring a removable tab or bracket. Built to handle serious loads, this clamp has been tested up to 12,000 lbs before slipping on the tube, making it ideal for demanding off-road builds.\u003c\/p\u003e\n\u003cp\u003eMade from 1\/2\" wall DOM tube with a 1.5\" ID and 2.5\" OD design. Uses 1\/4\" allen head bolts for secure clamping. Clamp bolt torque specification is 8-10 ft-lbs. Note: 1\/2x20TPI stabilizer mounting bolt not included.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1697\u003c\/li\u003e\n\u003cli\u003eFitment: Universal - fits 1.5\" OD tubes\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/2\" wall DOM steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.5\" ID, 2.5\" OD, 6-bolt design\u003c\/li\u003e\n\u003cli\u003eSpecial features: Tested to 12,000 lbs, removable mounting solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x 6-bolt tube clamp\u003c\/li\u003e\n\u003cli\u003e1\/4\" allen head bolts (qty as needed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use 1\/2\" threaded bolt for Hydro Assist Steering applications\u003c\/li\u003e\n\u003cli\u003eWeld additional tabs for double shear when using with hydro assist mounting\u003c\/li\u003e\n\u003cli\u003e1\/2x20TPI stabilizer mounting bolt sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"No","offer_id":48363475763357,"sku":"PN1697-Kit-2","price":38.5,"currency_code":"USD","in_stock":false},{"title":"Yes","offer_id":48363475796125,"sku":"PN1697-Kit-1","price":49.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1697-ruffstuff-1-50-inch-od-steering-tube-clamp-ruffstuff-specialties-1.webp?v=1780419161"},{"product_id":"r1589","title":"Drag Link Insert for High Angle Drag Link","description":"\u003ch3\u003eDrag Link Insert for High Angle Drag Link\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWeld-in insert for GM 1-ton rod ends in pitman arms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis insert is used to install a GM 1-ton high angle rod end into a pitman arm as part of our Y-Link steering setup. The taper measures approximately 0.77\" at the large end, and the pitman arm hole must be drilled out to 1\". It’s a tight fit by design and may require light grinding on the non-shouldered end to seat properly.\u003c\/p\u003e\n\u003cp\u003eThe insert must be welded in place for safe operation and long-term durability. TIG welding is recommended due to the small size and fitment tolerances, but MIG is acceptable if done properly. This part is not intended to be press-fit or bolted in and should only be used in custom steering applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1589\u003c\/li\u003e\n\u003cli\u003eFor GM 1-ton high angle rod ends (~0.77\" taper)\u003c\/li\u003e\n\u003cli\u003eRequires 1\" drilled hole in pitman arm\u003c\/li\u003e\n\u003cli\u003eMay require light grinding for fitment\u003c\/li\u003e\n\u003cli\u003eWeld-in installation (TIG or MIG)\u003c\/li\u003e\n\u003cli\u003eWorks with our Y-Link steering kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363477893277,"sku":"PN1589","price":14.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1589-drag-link-insert-for-high-angle-drag-link-ruffstuff-specialties-1.webp?v=1780419230"},{"product_id":"r1570","title":"Axle Steering Stops","description":"\u003ch3\u003eAxle Side Mount Shock Brackets\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEliminate weak single-shear shock mounts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese axle side mount shock brackets are designed to replace the common single-shear shock posts found on many factory setups, including Blazers, Land Cruisers, and various Jeep models. Built from .25\" P\u0026amp;O steel, they allow you to mount 1 1\/4\", 1 1\/2\", or 1 3\/4\" eye shocks securely in double shear for improved strength and durability. Sold in pairs and shipped unwelded for custom fitment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1570\u003c\/li\u003e\n\u003cli\u003e1\/4\" thick P\u0026amp;O steel construction\u003c\/li\u003e\n\u003cli\u003e1\/2\" bolt hole for secure mounting\u003c\/li\u003e\n\u003cli\u003eFits 1 1\/4\", 1 1\/2\", or 1 3\/4\" eye shocks\u003c\/li\u003e\n\u003cli\u003eUnwelded for custom installation\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Products You May Need:\u003c\/strong\u003e 1\/2\" x 3\" shock bracket bolts\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363480449181,"sku":"PN1570-Kit-1","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1570-axle-steering-stops-image-1-ruffstuff-specialties.webp?v=1780419249"},{"product_id":"pn1560","title":"RMM GM Crossover Steering TRE Replacement Kit","description":"\u003ch3\u003eGM Crossover Steering TRE Replacement Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty tie rod end replacement for GM crossover steering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis tie rod end replacement kit is designed specifically for GM crossover steering setups, providing the heavy-duty components needed to handle the increased loads and stresses of off-road use. Essential for maintaining proper steering geometry and reliability when running larger tires or aggressive off-road applications.\u003c\/p\u003e\n\u003cp\u003eBuilt with high-strength materials and precision engineering to deliver long-lasting performance under demanding conditions. The kit includes all necessary components for a complete tie rod end replacement, ensuring proper fit and function with GM crossover steering systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1560\u003c\/li\u003e\n\u003cli\u003eFitment: GM crossover steering applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: Precision-engineered for proper geometry\u003c\/li\u003e\n\u003cli\u003eDesign: Complete replacement kit for crossover steering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAll necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction for off-road use\u003c\/li\u003e\n\u003cli\u003e4 - GM 1 Ton Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003e2 Standard (TK234) for the Tie Rod\u003c\/li\u003e\n\u003cli\u003e2 Standard (TK234) TRE for the Drag Link with Jam Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for GM crossover steering systems\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper alignment\u003c\/li\u003e\n\u003cli\u003eEssential upgrade for heavy-duty off-road applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Use High-Angle Drag Link ends (ES2027) \/ Use Offset Tie Rod Ends","offer_id":48363480514717,"sku":"PN1560-Kit-4","price":177.21,"currency_code":"USD","in_stock":true},{"title":"Use High-Angle Drag Link ends (ES2027) \/ Use Standard Tie Rod Ends","offer_id":48363480547485,"sku":"PN1560-Kit-3","price":167.31,"currency_code":"USD","in_stock":true},{"title":"Use Standard Tie Rod Ends \/ Use Offset Tie Rod Ends","offer_id":48363480580253,"sku":"PN1560-Kit-2","price":157.41,"currency_code":"USD","in_stock":true},{"title":"Use Standard Tie Rod Ends \/ Use Standard Tie Rod Ends","offer_id":48363480613021,"sku":"PN1560-Kit-1","price":147.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1560-ruffstuff-gm-crossover-steering-tre-replacement-kit-ruffstuff-specialties-1.webp?v=1780419252"},{"product_id":"pn1559","title":"RMM Y-Link TRE Replacement Kit","description":"\u003ch3\u003eY-Link TRE Replacement Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComplete tie rod end replacement kit for Y-link steering systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement kit provides everything needed to rebuild or upgrade your Y-link steering setup with high-quality tie rod ends and hardware. Essential for maintaining precise steering control and eliminating play in your steering system. Perfect for off-road builds where reliable steering components are critical for safety and performance on challenging terrain.\u003c\/p\u003e\n\u003cp\u003eKit includes heavy-duty tie rod ends designed specifically for Y-link steering configurations, along with all necessary hardware for complete installation. Components are built to withstand the demanding conditions of off-road use while providing smooth, precise steering response. Engineered for durability and long service life in harsh environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1559\u003c\/li\u003e\n\u003cli\u003eFitment: Universal Y-link steering applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: Designed for Y-link steering geometry\u003c\/li\u003e\n\u003cli\u003eDesign: Complete replacement kit with all hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTie rod ends for Y-link system (qty varies by application)\u003c\/li\u003e\n\u003cli\u003eInstallation hardware and fasteners\u003c\/li\u003e\n\u003cli\u003eComplete kit for Y-link steering rebuild\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for Y-link steering configurations\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper alignment\u003c\/li\u003e\n\u003cli\u003eGrease fittings allow for regular maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Over the Knuckle","offer_id":48363480645789,"sku":"PN1559-Kit-1","price":170.28,"currency_code":"USD","in_stock":false},{"title":"Under the Knuckle","offer_id":48363480678557,"sku":"PN1559-Kit-2","price":170.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1559-Kit-2-ruffstuff-y-link-tre-replacement-kit-ruffstuff-specialties-1.webp?v=1780419253"},{"product_id":"r1468","title":"Tapered Steering Knuckle Insert 2 Pack","description":"\u003ch4\u003eTapered Steering Knuckle Insert 2 Pack\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEasy GM 1 ton steering upgrade solution.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese inserts let you use GM 1 ton tie rod ends without expensive reamers. Just drill your knuckles to 7\/8\" and drop these in. Works for over or under knuckle steering setups. Steel construction with GM 1 ton taper (.75\" to .68\"). Compatible with both steering configurations and designed for reliable off-road use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1468\u003c\/li\u003e\n\u003cli\u003eFitment: Universal with GM 1 ton tie rod ends\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eDimensions: .75\" to .68\" taper, requires 7\/8\" bore\u003c\/li\u003e\n\u003cli\u003eDesign: Drop-in installation, over\/under knuckle compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x Tapered steering knuckle inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDrill knuckles to 7\/8\" bore before installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363481890973,"sku":"PN1468-Kit-1","price":23.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1468-full.jpg?v=1780419302"},{"product_id":"r1404","title":"7\/8\" x 18TPI Left Hand Tube Adapter 1\" ID HEX","description":"\u003ch3\u003e7\/8\" x 18 TPI Left Hand Tube Adapter 1\" ID HEX\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHex Head Weld Bung for Easy TRE Adjustment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis hex head tie rod end weld bung is designed for 1\" ID tubing, giving you easy adjustability when building custom drag links or tie rods. The hex profile allows for quick adjustments with a wrench—no pipe wrench scars or stress risers—making steering setup and maintenance far simpler. Commonly included in our steering kits, but offered here individually for custom fabrication projects.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1404\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThread: 7\/8\"-18 TPI Left Hand\u003c\/li\u003e\n\u003cli\u003eFits 1\" inner diameter tubing\u003c\/li\u003e\n\u003cli\u003eHex head design for easy wrench adjustment\u003c\/li\u003e\n\u003cli\u003eDurable steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWelding Tips:\u003c\/strong\u003e Adjust welder settings to avoid overheating and warping threads. Do not weld with the rod end threaded inside the adapter. Allow parts to fully cool before assembly.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363483660445,"sku":"PN1404","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1404-7-8-inch-x-18-tpi-left-hand-tube-adapter-1-inch-id-hex-image-1-ruffstuff-specialties.webp?v=1780419348"},{"product_id":"r1354","title":"Tapered Steering Knuckle Insert","description":"\u003ch3\u003eTapered Steering Knuckle Insert\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCost-effective solution for GM 1-ton steering upgrades.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA cost-effective solution for upgrading to GM 1-ton steering without buying an expensive tapered reamer. Simply drill your knuckles to 7\/8\" and drop these inserts in place. These precision-machined inserts eliminate the need for costly specialized tooling while ensuring a perfect fit with GM 1-ton tie rod ends. The tapered design provides the exact geometry needed for proper steering component alignment and eliminates play in the joint connection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1354\u003c\/li\u003e\n\u003cli\u003eFits GM 1-ton taper (.75\" large end, .68\" small end)\u003c\/li\u003e\n\u003cli\u003eWorks with OTK or UTK steering setups\u003c\/li\u003e\n\u003cli\u003eRequires 7\/8\" drill bit\u003c\/li\u003e\n\u003cli\u003eSold individually - order one per tie rod end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Compatible with our GM 1-ton tie rod ends only.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363485200541,"sku":"PN1354","price":12.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1354-r1468-main.jpg?v=1780419395"},{"product_id":"r1352","title":"TRE, High Angle Drag Link, ES2027","description":"\u003ch3\u003eTRE, High Angle Drag Link\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-angle tie rod end for extreme steering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis high angle drag link tie rod end is designed for extreme steering applications where standard tie rod ends can't handle the required angles. Perfect for builds with significant suspension travel or modified steering geometry, this ES2027 provides the articulation needed for proper steering function. Essential for builds where steering components must operate at extreme angles without binding.\u003c\/p\u003e\n\u003cp\u003eBuilt around the proven ES2027 tie rod end with high-angle design. At 2.4 lbs, this component provides the strength needed for off-road use while allowing the extreme articulation required for modified steering systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1352\u003c\/li\u003e\n\u003cli\u003eFitment: Universal with ES2027 tie rod end compatibility\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.4 lbs weight\u003c\/li\u003e\n\u003cli\u003eDesign: High-angle drag link for extreme steering applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh angle drag link assembly\u003c\/li\u003e\n\u003cli\u003eES2027 tie rod end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for extreme steering angle applications\u003c\/li\u003e\n\u003cli\u003eCompatible with ES2027 tie rod end specifications\u003c\/li\u003e\n\u003cli\u003eEssential for builds with modified steering geometry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Both","offer_id":48363485495453,"sku":"PN1352-Kit-1","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Left Hand Thread","offer_id":48363485528221,"sku":"PN1352-Kit-3","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Right Hand Thread","offer_id":48363485560989,"sku":"PN1352-Kit-2","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1352_tre_high_angle_drag_link_es2027_main.jpg?v=1780419399"},{"product_id":"r1351","title":"TRE, Standard, ES2234","description":"\u003ch3\u003eTRE, Standard\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTime-tested GM 1 ton tie rod end.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis standard GM 1 ton tie rod end is time tested and works every time. Perfect for builds requiring reliable steering components with proven performance, this ES2234 provides the dependability you need for serious off-road use. When you need steering components that won't let you down, this tie rod end delivers the reliability that has made it a standard in the industry.\u003c\/p\u003e\n\u003cp\u003eBuilt with GM 1 ton specifications featuring .749\"-.748\" taper. At 6 lbs, this tie rod end provides the strength needed for demanding applications. Available in both right and left hand thread configurations for proper installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1351\u003c\/li\u003e\n\u003cli\u003eFitment: GM 1 ton applications\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: .749\"-.748\" taper, 6 lbs weight\u003c\/li\u003e\n\u003cli\u003eDesign: Standard GM 1 ton tie rod end with jam nut included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eES2234 tie rod end\u003c\/li\u003e\n\u003cli\u003eJam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDriver side uses right hand thread, passenger side uses left hand thread\u003c\/li\u003e\n\u003cli\u003eReam taper to .75\" if replacing smaller TRE\u003c\/li\u003e\n\u003cli\u003eTube adapters not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Both","offer_id":48363485593757,"sku":"PN1351-Kit-1","price":80.3,"currency_code":"USD","in_stock":true},{"title":"Left Hand Thread","offer_id":48363485626525,"sku":"PN1351-Kit-3","price":46.2,"currency_code":"USD","in_stock":true},{"title":"Right Hand Thread","offer_id":48363485659293,"sku":"PN1351-Kit-2","price":46.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1351_tre_standard_es2234_main.jpg?v=1780419400"},{"product_id":"r1350","title":"TRE, Y-Link, ES2233L","description":"\u003ch4\u003eTRE, Y-Link\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eY-link tie rod end for custom steering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Y-link tie rod end is designed for custom steering applications where standard configurations won't work. Perfect for builds requiring unique steering geometry or specialized linkage setups, this ES2233L provides the flexibility needed for custom steering solutions. Essential for builds where standard steering components don't fit the application and custom solutions are required.\u003c\/p\u003e\n\u003cp\u003eBuilt around the proven ES2233L tie rod end with Y-link configuration. At 2.6 lbs, this component provides the strength needed for off-road use while offering the unique geometry required for specialized steering applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1350\u003c\/li\u003e\n\u003cli\u003eFitment: Universal with ES2233L tie rod end compatibility\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.6 lbs weight\u003c\/li\u003e\n\u003cli\u003eDesign: Y-link configuration for custom steering applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eY-link assembly\u003c\/li\u003e\n\u003cli\u003eES2233L tie rod end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for custom steering geometry applications\u003c\/li\u003e\n\u003cli\u003eCompatible with ES2233L tie rod end specifications\u003c\/li\u003e\n\u003cli\u003eEssential for specialized steering linkage setups\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Over the Knuckle","offer_id":48363485692061,"sku":"PN1350-Kit-1","price":50.6,"currency_code":"USD","in_stock":false},{"title":"Under the Knuckle","offer_id":48363485724829,"sku":"PN1350-Kit-2","price":50.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1350-tre-y-link-es2233l-image-1-ruffstuff-specialties.webp?v=1780419402"},{"product_id":"r1344","title":"7\/8\" TRE Jam Nut (18TPI) Right Hand","description":"\u003ch3\u003e7\/8\" TRE Jam Nut (18 TPI) Right Hand\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReliable Locking for GM Tie Rod Ends\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis right-hand thread jam nut is made to fit 7\/8\"-18 TPI GM tie rod ends, ensuring your steering components stay locked and secure. Built from high-quality steel and finished with zinc and nickel plating, it resists corrosion and holds up under tough conditions. Perfect for both maintenance and custom steering setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1344\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits 7\/8\"-18 TPI GM tie rod ends\u003c\/li\u003e\n\u003cli\u003eRight-hand thread\u003c\/li\u003e\n\u003cli\u003eZinc and nickel plated for long-lasting protection\u003c\/li\u003e\n\u003cli\u003eDurable steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363486609565,"sku":"PN1344","price":4.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/r1344_78_tre_jam_nut_right_hand_main.jpg?v=1780419406"},{"product_id":"r1326","title":"Tie Rod End Offset, ES23434 TRE","description":"\u003ch3\u003eTie Rod End Offset\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOffset tie rod end for improved steering geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis offset tie rod end solves steering geometry issues in lifted or modified vehicles by providing the correct angle for optimal steering performance. When standard tie rod ends create binding or poor steering feel due to suspension modifications, this offset design restores proper geometry. Essential for builds where steering components need repositioning for better performance.\u003c\/p\u003e\n\u003cp\u003eBuilt around the proven ES23434 tie rod end with custom offset design. At 2 lbs, this component provides the strength needed for off-road use while correcting steering geometry issues common in modified vehicles.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1326\u003c\/li\u003e\n\u003cli\u003eFitment: Universal with ES23434 tie rod end compatibility\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 2 lbs total weight\u003c\/li\u003e\n\u003cli\u003eDesign: Offset geometry for improved steering angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOffset tie rod end assembly\u003c\/li\u003e\n\u003cli\u003eES23434 tie rod end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to correct steering geometry in lifted or modified vehicles\u003c\/li\u003e\n\u003cli\u003eCompatible with ES23434 tie rod end specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Both","offer_id":48363488805021,"sku":"PN1326-Kit-1","price":105.38,"currency_code":"USD","in_stock":true},{"title":"Driver Side (RH Threads)","offer_id":48363488837789,"sku":"PN1326-Kit-2","price":52.69,"currency_code":"USD","in_stock":false},{"title":"Passenger Side (LH Threads)","offer_id":48363488870557,"sku":"PN1326-Kit-3","price":52.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1326-full.jpg?v=1780419433"},{"product_id":"r1071","title":"7\/8\" x 18TPI Right Hand Tube Adapter 1\" ID HEX","description":"\u003ch3\u003e7\/8\" x 18TPI Right Hand Tube Adapter 1\" ID HEX\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHex Head TRE Adapter for Easy Steering Adjustments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a Hex Head Tie Rod End weld bung\/tube adapter. In a TRE setup, adjustability is the key to easy steering alignment, so we provide this style with all our steering kits. Here we offer them individually if you are making your own drag link or tie rod.\u003c\/p\u003e\n\u003cp\u003eThey are more expensive to make than our standard weld bungs but make setting up your steering that much easier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN1071\u003c\/li\u003e\n\u003cli\u003eThread: 7\/8\"-18 TPI Right Hand\u003c\/li\u003e\n\u003cli\u003eFits 1\" inner diameter tubing\u003c\/li\u003e\n\u003cli\u003eHex head for easy wrench adjustments\u003c\/li\u003e\n\u003cli\u003eMaterial: Mild steel, weld-in style\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips to help prevent any seized or warped threads:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrectly adjust welder settings — too much heat can warp the threads.\u003c\/li\u003e\n\u003cli\u003eDo not weld the tube adapter with the rod end threaded inside — excess heat can damage the Threads.\u003c\/li\u003e\n\u003cli\u003eBe careful to avoid prolonged heat on the tube adapter when welding to D.O.M.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363503616157,"sku":"PN1071","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/R1071-7-8-inch-x-18-tpi-right-hand-tube-adapter-1-inch-id-hex-image-1-ruffstuff-specialties.webp?v=1780419679"}],"url":"https:\/\/rileymountainmotorsports.com\/collections\/tie-rod-end-steering-accessories.oembed","provider":"Riley mountain motorsports","version":"1.0","type":"link"}