{"product_id":"r2873","title":"Toyota 8.75\" Axle Housing (Bare Tube)","description":"\u003ch3\u003eToyota 8.75\" Axle Housing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFabricated 8.75\" housing, 72\" long with 3.5\" × 3\/8\" DOM tubes and reinforced center\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis USA-built housing uses a 3\/8\" face plate that’s drilled and machined flat after welding for precise third-member fit. The shell is 1\/4\" steel with 12 bends and added 1\/4\" armor in high-impact areas, plus 1\/4\" internal gusseting for rigidity, these features make Axle Housings dramatically stronger than other fabricated housings on the market. It accepts standard Toyota 8.75\" third members.\u003c\/p\u003e\n\u003cp\u003eAxle tubes are 3.5\" OD × 0.375\" wall DOM (2.75\" ID) keyed into the face plate and fully gusseted— these are built to 72\" total length so you can cut to your desired width to fit your application. A weld-in 3\/4\" NPT fill\/drain bung is included; installation requires cutting\/welding, and the breather vent requires drilling and tapping (5\/16\"-18). Center section armor, studs, inner seal surface, and seal set screws are included to simplify final assembly.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: PN2873\u003c\/li\u003e\n\u003cli\u003eOverall housing length: 72\"\u003c\/li\u003e\n\u003cli\u003e3\/8\" face plate, machined after welding\u003c\/li\u003e\n\u003cli\u003e1\/4\" shell with 12 bends + 3\/16\" armor\u003c\/li\u003e\n\u003cli\u003e1\/4\" internal gusseting ties center together\u003c\/li\u003e\n\u003cli\u003eAccepts Toyota 8.7\" third members\u003c\/li\u003e\n\u003cli\u003e3.5\" OD × 3\/8\" wall DOM tubes (2.75\" ID)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFace plate: 3\/8\" steel, machined post-weld\u003c\/li\u003e\n\u003cli\u003eMain shell: 1\/4\" steel with additional 3\/16\" armor\u003c\/li\u003e\n\u003cli\u003eStuds: M10-\u003c\/li\u003e\n\u003cli\u003eFill plug (standard): 3\/4\" NPT with weld-in bung\u003c\/li\u003e\n\u003cli\u003eBreather vent: drill\/tap 5\/16\"-18; brass barb included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eToyota 8.75\" bare tube housing\u003c\/li\u003e\n\u003cli\u003eCenter section armor installed\u003c\/li\u003e\n\u003cli\u003eCenter section studs\u003c\/li\u003e\n\u003cli\u003eFill plug and weld-in bung (cutting\/welding required)\u003c\/li\u003e\n\u003cli\u003eInner seal surface and seal set screws\u003c\/li\u003e\n\u003cli\u003eBrass thread-in breather barb fitting (drilling\/tapping required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eHousing ships long at 72\" and requires cutting\/fixturing to your width; mock up axle ends, brackets, and pinion angle before welding. Install the 3\/4\" NPT bung by cutting and welding, and drill\/tap the breather to 5\/16\"-18 as needed; verify third-member fit on the machined face before final assembly. Use proper fixturing to keep tubes straight, then complete all welds and recheck runout and stud torque prior to service.\u003c\/p\u003e\n\u003cdiv class=\"product-info__block product-options\"\u003e\u003cstrong\u003eTHIS IS A MADE TO ORDER ITEM, PLEASE ALLOW 3-4 WEEKS.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-info__block product-backorder\"\u003e\n\u003cdiv class=\"backorder\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Riley Mountain Motorsports","offers":[{"title":"Default Title","offer_id":48363418779805,"sku":"PN2873-B-Kit-1","price":1373.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0768\/1989\/0333\/files\/Pic1_3.jpg?v=1780417839","url":"https:\/\/rileymountainmotorsports.com\/products\/r2873","provider":"Riley mountain motorsports","version":"1.0","type":"link"}