Stryker 2″ Race Chassis

Stryker 2″ Race Chassis

Full weld-out of the base chassis
$8,500.00
Skip to product information
Stryker 2″ Race Chassis

Stryker 2″ Race Chassis

$8,500.00
options

Build your next rock crawler, trail rig, or off-road race car on the Stryker 2″ Race Chassis. This midsize tube chassis pairs a 2″ DOM steel primary structure with signature rolled tube lines and room to configure the drivetrain and suspension around your build. The Stryker platform is based on a chassis originally designed by Jason “Locktup” Stanley and refined through years of testing.

Starting at $7,500. Local pickup only in Wilton, CA 95693.

Chassis construction

The Stryker uses drawn-over-mandrel (DOM) mild steel tubing throughout. A full X-brace, lower W-bracing, and complete roof tube structure come standard.

  • 2″ × .188″ wall subframe and rocker rails, shown in bright green in the drawings

  • 2″ × .120″ wall main chassis tubing, shown in gray

  • 1.75″ × .120″ wall window V-bars and optional additional bracing, shown in royal blue

Build configurations

  • Wheelbase — Designed for 115″ and up. Final wheelbase depends on tire size and intended use.

  • Powertrain — Accommodates LS V8 and other drivetrain setups. Designed for custom over-the-top or forward-facing headers.

  • Cooling — Designed for a rear-mounted radiator and cooling package, with room up front for smaller transmission, oil, or power steering coolers.

  • Suspension — Supports front and rear four-link setups, leading and trailing arms, coilovers, and bypass shocks. The straight lower rear bumper tube simplifies sway bar packaging. The lower frame rails accommodate a 50/50 split between shock uptravel and downtravel.

  • Fuel cell — The rear section is designed around a JAZ 32-gallon JeepSpeed fuel cell, with room for a larger custom cell.

Choose your weld configuration

Tack-Welded Base · $7,500
The chassis is supplied tack-welded, with key areas fully welded to keep it square during transport. Tubing butt joints are internally sleeved with 1.75″ × .120″ wall DOM, fully welded, and plug-welded. Coped joints are deburred, beveled, and cleaned for final welding.

Full Weld-Out · $8,500
Includes full welding of the base chassis.

Pricing and options

Configuration Price
Base chassis, tack-welded $7,500
Full weld-out of the base chassis +$1,000
Additional bracing, cut and coped for DIY welding (royal blue) +$390
Additional bracing, installed and welded (royal blue) +$880
1.75″ tube gussets, cut and coped for DIY welding (red) +$270
1.75″ tube gussets, installed and welded (red) +$630
DIY mount for the JAZ 32-gallon JeepSpeed fuel cell

DIY bracing and gussets come cut and coped for welding. Installed bracing and gusset prices include parts and require the Full Weld-Out configuration. Contact Riley Mountain Motorsports to arrange add-ons and pickup.

You may also like